Page 1 of 1

stumped...how do i take of my front turn signals???????

Posted: Wed Feb 08, 2012 9:42 pm
by gjbellinger
They just turn inside that big rubber tower when you have your 14mm wrench on one side and your 12mm on the other!!!

stumped...how do i take of my front turn signals???????

Posted: Wed Feb 08, 2012 9:52 pm
by Jeff Saline
On Thu, 09 Feb 2012 03:42:14 -0000 "gjbellinger" writes:
> They just turn inside that big rubber tower when you have your 14mm > wrench on one side and your 12mm on the other!!!
<><><><><> <><><><><> Have you removed the lens and taken a look inside yet? I'm betting not. : ) Best, Jeff Saline ABC # 4412 South Dakota Airmarshal Airheads Beemer Club www.airheads.org The Beautiful Black Hills of South Dakota 75 R90/6, 03 KLR650 . . ____________________________________________________________ 53 Year Old Mom Looks 33 The Stunning Results of Her Wrinkle Trick Has Botox Doctors Worried http://thirdpartyoffers.juno.com/TGL3141/4f3342f118c02adc504st05vuc

stumped...how do i take of my front turn signals???????

Posted: Thu Feb 09, 2012 5:18 am
by eddie mauri
To me, the easiest way to take off the left or right turn signal is to land on that respective side (left or right) when you fall off road, or hit a deer. Cages work well too. Eddie M. [Non-text portions of this message have been removed]

stumped...how do i take of my front turn signals???????

Posted: Thu Feb 09, 2012 11:01 am
by Jud
Am I missing something? I just take off the nuts inside the fairing on the inner end of the stalk, pop the wire connectors, and the whole thing comes out of the fairing.
--- In DSN_KLR650@yahoogroups.com, Jeff Saline wrote: > > On Thu, 09 Feb 2012 03:42:14 -0000 "gjbellinger" > writes: > > They just turn inside that big rubber tower when you have your 14mm > > wrench on one side and your 12mm on the other!!! > <><><><><> > <><><><><> > > Have you removed the lens and taken a look inside yet? > > I'm betting not. : ) > > Best, > > Jeff Saline > ABC # 4412 South Dakota Airmarshal > Airheads Beemer Club www.airheads.org > The Beautiful Black Hills of South Dakota > 75 R90/6, 03 KLR650 > > . > . > ____________________________________________________________ > 53 Year Old Mom Looks 33 > The Stunning Results of Her Wrinkle Trick Has Botox Doctors Worried > http://thirdpartyoffers.juno.com/TGL3141/4f3342f118c02adc504st05vuc >

for sale - brand new tammy's totally wired high output headlight har

Posted: Sat Feb 11, 2012 2:44 pm
by Stu
I have been a member of this forum for years and no longer have any KLR650's left. I always appreciated reading all of the tips and other postings. They were of great value when I was modifying my KLR's. I have some left over parts from one of my project bikes that I sold before doing many of the mods. The buyer didn't want any of the parts so they sat i a box on my basement shelf. First up is a brand new Tammy's Totally Wired High Output Headlight Harness with instructions. The original cost was $45.00 w/o shipping. I will sell for $35.00 plus $5.35 priority mail shipping. I can send pictures on request. Please e-mail me at crew696@... if interested.