Wilsons Sandbox

Hey JWF -- I treated myself to a Christmas present and bought a set of these LEDs -- amber with black housing and a post. Have been happy so far. http://www.harrisonspecialties.com/mm5/merchant.mvc?Screen=PROD&Store_Code=HS&Product_Code=48LEDAmberSideMountwithStud&Category_Code=48LED Wendell

On Sun, 08 Jan 2012 16:33:33 -0000 "DavidD" writes:

> Happy 2012! I have a feeling it is going to be a great year. > I have a quick question concerning the top/rear motor mount on my > 2001 KLR 650. Can the nut on the 8x42 fastener that passes through > the engine be a standard one with a washer, or is the factory > nut/plate unit required? I discovered this fastener (bolt and nut) > missing on this recently purchased vehicle. Any other tips on > replacing it would be appreciated as I need to replace it today,

<><><><><> <><><><><> I'll guess there is no problem using a washer and nut. The stock configuration just makes it easier to tighten since you only need to turn the bolt and the nut part will hold itself in place. Best, Jeff Saline ABC # 4412 South Dakota Airmarshal Airheads Beemer Club www.airheads.org The Beautiful Black Hills of South Dakota 75 R90/6, 03 KLR650 . . ____________________________________________________________ Penny Stock Soaring 3000% Sign up for Free to find out what the next 3000% Stock Winner is! http://thirdpartyoffers.juno.com/TGL3141/4f09e96c20c4212703east06vuc

David, don't know if oem is required but a good grade nut would be better than none until you know. Some Loctite (not the nuclear grade) would be good on every fastener on the bike. Good riding Don M -----Original Message----- From: DavidD Sent: Sunday, January 08, 2012 11:33 AM To: DSN_KLR650@yahoogroups.com Subject: [DSN_KLR650] Motor mount fastener Happy 2012! I have a feeling it is going to be a great year. I have a quick question concerning the top/rear motor mount on my 2001 KLR 650. Can the nut on the 8x42 fastener that passes through the engine be a standard one with a washer, or is the factory nut/plate unit required? I discovered this fastener (bolt and nut) missing on this recently purchased vehicle. Any other tips on replacing it would be appreciated as I need to replace it today, -----Original Message----- From: DavidD Sent: Sunday, January 08, 2012 11:33 AM To: DSN_KLR650@yahoogroups.com Subject: [DSN_KLR650] Motor mount fastener Happy 2012! I have a feeling it is going to be a great year. I have a quick question concerning the top/rear motor mount on my 2001 KLR 650. Can the nut on the 8x42 fastener that passes through the engine be a standard one with a washer, or is the factory nut/plate unit required? I discovered this fastener (bolt and nut) missing on this recently purchased vehicle. Any other tips on replacing it would be appreciated as I need to replace it today, ------------------------------------ List Sponsors - Dual Sport News: http://www.dualsportnews.com Arrowhead Motorsports: http://www.arrowheadmotorsports.com List FAQ courtesy of Chris Krok: http://www.bigcee.com/klr650faq.html Member Map: http://groups.yahoo.com/group/DSN_KLR650/app/peoplemap/view/map Group Apps: http://groups.yahoo.com/group/DSN_KLR650/grouplets/subscriptionsYahoo! Groups Links ----- No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.1901 / Virus Database: 2109/4730 - Release Date: 01/08/12