Page 1 of 1
(nxr)(nklr)(nktm200) the latest riding vid.
Posted: Sun Dec 18, 2011 3:12 pm
by Eric J Foster
A couple years of video and an attempt to condense it into five
minutes and fifteen seconds. Everywhere from The Forks and South China
Maine, Mt. Washington New Hampster to Tamaqua Pennsylvania.
http://www.youtube.com/watch?v=wHgZqUSe6UU
Enjoy!
E
top of radiator shroud/cowling pre-08 screw fix
Posted: Sun Dec 18, 2011 5:10 pm
by Jeffrey
Finally found a better way. Screws always come loose/rattle off or
you have to tighten them so much, it hurts the plastic.
Mud skirt rivets aka push rivets aka push pins aka push in rivets work excellent.
I used the 1/4 inch hole type. Had to drill the screw
holes a little to make them fit. But, they are also
available in metric sizes so you wouldn't have to drill.
But, I had the 1/4 inch ones in my garage.
They don't rattle loose and they are cheap easy to replace.
Looks much better than cable ties which some people use.
These push rivets are just as easy or easier to use than cable ties
and they last longer.
J#3