Wilsons Sandbox

Same here, got both SAE and Metric, keep them on a loops of 12ga wire in my tool bag. Use them all the time, did notice the chrome is chipping off however, not a big deal until your say.. in a engine adjusting something and a flake chips off and fall down into your valve train.... Dooden A15 Green Ape

--- In DSN_KLR650@yahoogroups.com, "revmaaatin" wrote: > > LIST- > Found this this morning in my 'in' box. > > Friday, Saturday on line only at Sears. > $23.99 reg $79.99 > > http://www.sears.com/shc/s/dcp_10153_12605_Tools+2+Day+Specials_GearWrench > > > I have the gen 1 gear wrenches and they are a useful addition to any tool box. > > revmaaatin. >

Did you warm the engine up thoroughly before draining the old oil? That would stir things up inside and leave the engine cleaner. Mike Martin, Louisville, KY ________________________________ From: ""The Terror"" To: DSN_KLR650@yahoogroups.com Sent: Friday, December 2, 2011 8:49 AM Subject: [DSN_KLR650] Recent oil change results I recently did an oil/oil filter change on my KLR.I used Castrol Actevo X-tra 4T part synthetic.I change the oil every 3000. Later that same day I ended up taking a 50 mile ride.Round trip 100 miles.It was hiway miles where I normally cruise at 70 mph or so.RPM's probably never went over 5000 at any point of the ride.The next day I looked in the sight window to confirm the oil level. The oil appears to be black.After 100 miles?I have over 45,000 miles (completely stock motor) on the bike & for the most part I have used this oil exclusively.Any one else ever see this? [Non-text portions of this message have been removed]