Wilsons Sandbox

Hi Guys; Form my past Long Distance travels I have few spares you may consider to have. I have -full set of the KLR 650 stainless steel replacement hardware (would fit whole spectrum of production years)- hundreds of items including a "Carburetor tool" to allow you to adjust mixture without removing your carb. - left engine cover with stator (OEM) .. form 1996 KLR - would fit many years - please check compatibility - DOT Helmet - size Xl - clean inside (always used my cap ;-. - this one is really good for travel (typical nicks on the outside - this helmet was "around" many far away places ... All that for $200 (really cheap considering what you are getting in return) plus $25 shipping via UPS Ground or you can pick it up in Chicagoland area pics you can check here: https://picasaweb.google.com/106009892305560088066/KLR650_Parts?authuser=0&authkey=Gv1sRgCO3PoYDyhs2RrwE&feat=directlink If interested please drop me a line : kriscichon@... I would prefer PayPal to kriscichon@... account (pay and send me e-mail - will ship same day) or I can create a Ebay auction "ad-hoc" for you Thank You Kris Cichon

Hi Kris, Great to see you online again after all these years. You should be framing the Jakeman Carb Tool. You know those are pretty special. Fred http://www.arrowheadmotorsports.com From: Kris Cichon Sent: Monday, November 14, 2011 9:10 AM To: DSN_KLR650@yahoogroups.com Subject: [DSN_KLR650] VENDOR - KLR650 - few parts you should have consider Hi Guys; Form my past Long Distance travels I have few spares you may consider to have. I have -full set of the KLR 650 stainless steel replacement hardware (would fit whole spectrum of production years)- hundreds of items including a "Carburetor tool" to allow you to adjust mixture without removing your carb. - left engine cover with stator (OEM) .. form 1996 KLR - would fit many years - please check compatibility - DOT Helmet - size Xl - clean inside (always used my cap ;-. - this one is really good for travel (typical nicks on the outside - this helmet was "around" many far away places ... All that for $200 (really cheap considering what you are getting in return) plus $25 shipping via UPS Ground or you can pick it up in Chicagoland area pics you can check here: https://picasaweb.google.com/106009892305560088066/KLR650_Parts?authuser=0&authkey=Gv1sRgCO3PoYDyhs2RrwE&feat=directlink If interested please drop me a line : mailto:kriscichon%40gmail.com I would prefer PayPal to mailto:kriscichon%40hotmail.com account (pay and send me e-mail - will ship same day) or I can create a Ebay auction "ad-hoc" for you Thank You Kris Cichon [Non-text portions of this message have been removed]

I have my carb. and rotor tool from Jake in a shadow box. Jest. I got one of his prototype rotor tools when he just started to make them. Thomas J. Komjathy DSK L.L.C. dskllc@... ________________________________ From: Fred Hink To: DSN_KLR650@yahoogroups.com; Kris Cichon Sent: Monday, November 14, 2011 11:33 AM Subject: Re: [DSN_KLR650] VENDOR - KLR650 - few parts you should have consider Hi Kris, Great to see you online again after all these years. You should be framing the Jakeman Carb Tool. You know those are pretty special. Fred http://www.arrowheadmotorsports.com From: Kris Cichon Sent: Monday, November 14, 2011 9:10 AM To: DSN_KLR650@yahoogroups.com Subject: [DSN_KLR650] VENDOR - KLR650 - few parts you should have consider Hi Guys; Form my past Long Distance travels I have few spares you may consider to have. I have -full set of the KLR 650 stainless steel replacement hardware (would fit whole spectrum of production years)- hundreds of items including a "Carburetor tool" to allow you to adjust mixture without removing your carb. - left engine cover with stator (OEM) .. form 1996 KLR - would fit many years - please check compatibility - DOT Helmet - size Xl - clean inside (always used my cap ;-. - this one is really good for travel (typical nicks on the outside - this helmet was "around" many far away places ... All that for $200 (really cheap considering what you are getting in return) plus $25 shipping via UPS Ground or you can pick it up in Chicagoland area pics you can check here: https://picasaweb.google.com/106009892305560088066/KLR650_Parts?authuser=0&authkey=Gv1sRgCO3PoYDyhs2RrwE&feat=directlink If interested please drop me a line : mailto:kriscichon%40gmail.com I would prefer PayPal to mailto:kriscichon%40hotmail.com account (pay and send me e-mail - will ship same day) or I can create a Ebay auction "ad-hoc" for you Thank You Kris Cichon [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]

Here is a KLR650 review I hadn't seen before... http://kramwartap.fortunecity.com/kawasakiKLR650_review.html

Ok, I'm a dummy, so what is it about a "Jakeman" carb tool, that makes it framable (jest or otherwise)?? From: Thomas Komjathy To: Fred Hink ; "DSN_KLR650@yahoogroups.com" DSN_KLR650@yahoogroups.com>; Kris Cichon Sent: Monday, November 14, 2011 11:57 AM Subject: Re: [DSN_KLR650] VENDOR - KLR650 - few parts you should have consider I have my carb. and rotor tool from Jake in a shadow box. Jest. I got one of his prototype rotor tools when he just started to make them. Thomas J. Komjathy DSK L.L.C. dskllc@... ________________________________ From: Fred Hink To: DSN_KLR650@yahoogroups.com; Kris Cichon Sent: Monday, November 14, 2011 11:33 AM Subject: Re: [DSN_KLR650] VENDOR - KLR650 - few parts you should have consider Hi Kris, Great to see you online again after all these years. You should be framing the Jakeman Carb Tool. You know those are pretty special. Fred http://www.arrowheadmotorsports.com From: Kris Cichon Sent: Monday, November 14, 2011 9:10 AM To: DSN_KLR650@yahoogroups.com Subject: [DSN_KLR650] VENDOR - KLR650 - few parts you should have consider Hi Guys; Form my past Long Distance travels I have few spares you may consider to have. I have -full set of the KLR 650 stainless steel replacement hardware (would fit whole spectrum of production years)- hundreds of items including a "Carburetor tool" to allow you to adjust mixture without removing your carb. - left engine cover with stator (OEM) .. form 1996 KLR - would fit many years - please check compatibility - DOT Helmet - size Xl - clean inside (always used my cap ;-. - this one is really good for travel (typical nicks on the outside - this helmet was "around" many far away places ... All that for $200 (really cheap considering what you are getting in return) plus $25 shipping via UPS Ground or you can pick it up in Chicagoland area pics you can check here: https://picasaweb.google.com/106009892305560088066/KLR650_Parts?authuser=0&authkey=Gv1sRgCO3PoYDyhs2RrwE&feat=directlink If interested please drop me a line : mailto:kriscichon%40gmail.com I would prefer PayPal to mailto:kriscichon%40hotmail.com account (pay and send me e-mail - will ship same day) or I can create a Ebay auction "ad-hoc" for you Thank You Kris Cichon [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]

I have one of those and the rotor tool. Jake was a real character. Criswell Sent from my iPad

On Nov 14, 2011, at 10:33 AM, "Fred Hink" wrote: > Hi Kris, > > Great to see you online again after all these years. > > You should be framing the Jakeman Carb Tool. You know those are pretty special. > > Fred > http://www.arrowheadmotorsports.com > > From: Kris Cichon > Sent: Monday, November 14, 2011 9:10 AM > To: DSN_KLR650@yahoogroups.com > Subject: [DSN_KLR650] VENDOR - KLR650 - few parts you should have consider > > Hi Guys; > Form my past Long Distance travels I have few spares you may consider to have. > I have > -full set of the KLR 650 stainless steel replacement hardware (would fit whole spectrum of production years)- hundreds of items including a "Carburetor tool" to allow you to adjust mixture without removing your carb. > - left engine cover with stator (OEM) .. form 1996 KLR - would fit many years - please check compatibility > > - DOT Helmet - size Xl - clean inside (always used my cap ;-. - this one is really good for travel (typical nicks on the outside - this helmet was "around" many far away places ... > > All that for $200 (really cheap considering what you are getting in return) plus $25 shipping via UPS Ground or you can pick it up in Chicagoland area > > pics you can check here: > https://picasaweb.google.com/106009892305560088066/KLR650_Parts?authuser=0&authkey=Gv1sRgCO3PoYDyhs2RrwE&feat=directlink > > If interested please drop me a line : mailto:kriscichon%40gmail.com > > I would prefer PayPal to mailto:kriscichon%40hotmail.com account (pay and send me e-mail - will ship same day) > or I can create a Ebay auction "ad-hoc" for you > > Thank You > Kris Cichon > > [Non-text portions of this message have been removed] > > [Non-text portions of this message have been removed]