Page 1 of 1
bracket
Posted: Wed Mar 28, 2001 9:21 am
by Eric Mercer
Randi,
At
www.buykawasaki.com look under "frame fittings" in the parts diagram for
your bike. You should see the brackets you're looking for there.
Eric
_________________________________________________________________
Get your FREE download of MSN Explorer at
http://explorer.msn.com
bracket
Posted: Wed Mar 28, 2001 9:52 am
by Randy.Hoskins@worldnet.att.net
Eric,
Thanks for the suggestion. I had already looked there. One of the
other listers confirmed what I had suspected. Kawasakid does not sell
them separately. They are only sold as part of the engine cowling.
Randy
Eric Mercer wrote:
bracket
Posted: Tue Apr 10, 2001 4:31 pm
by Henry (Terry) Brigham
Hi, Kurt. I have one left over from when I bought the Kawasaki bag set
up and then found that they wouldn't fit over a Corbin seat without
modification. I then bought Tim's set of racks to hold the Kawasaki bags
independently. So, I have the support bar left over. Give me $10. for it and
another $5. for freight and its yours. Terry Brigham Rockport Texas.
01 klr
Posted: Thu Oct 13, 2011 7:33 am
by jim simonet
Sure it has. I bought a '01 with 10K and later the speedo/odo stopped
working. Checked the cable and it was OK, took apart the front hub to
check the gear and founf out the tangs had been broken and JB welded
back into place. A quick fix if your selling something. Don't know how
long it was broken before the fix though. Could have been immediately
after breakage or it could have been fixed years after breakage. Not
saying that the one your looking at has the same issues, just
something to think about.
jim
On 10/12/11, Dooden wrote:
> HAahhaahhahahaha
>
> Thanks needed that giggle....
>
> Dooden
> A15 Green Ape
>
>
> --- In
DSN_KLR650@yahoogroups.com, Tengai Mark Van Horn
> wrote:
>>
>> Bring cash.
>>
>> Mark
>>
>> At 8:19 PM +0000 10/11/11, bigmike5555@... wrote:
>> Any hints on buying a 2001 klr with 10000 miles?
>>
>>
>> [Non-text portions of this message have been removed]
>>
>
>
>
bracket
Posted: Thu Oct 13, 2011 9:17 am
by Thomas Komjathy
Does anyone know if a bracket has been made to adapt the newer 2piston front caliper to the single. or better yet, one that will adapt the double piston caliper to the oversized EBC disk?
Thomas J. Komjathy
DSK L.L.C.
dskllc@...
[Non-text portions of this message have been removed]