Page 1 of 1
exhaust header nut torque spec?
Posted: Sat Jul 30, 2011 6:43 pm
by Flower Jamie
Hey, anybody know the torque value for the nuts that hold the header to the head? Thanks!
exhaust header nut torque spec?
Posted: Sat Jul 30, 2011 10:19 pm
by Jeff Saline
On Sat, 30 Jul 2011 16:43:51 -0700 Flower Jamie
writes:
> Hey, anybody know the torque value for the nuts that hold the header
> to the head? Thanks!
<><><><><><>
<><><><><><>
Jamie,
I don't see specs in the factory or Clymer manuals. I recall it's either
15 or 18 foot lbs. I'd probably start at 15 and go to 18 if there was a
leak.
Best,
Jeff Saline
ABC # 4412 South Dakota Airmarshal
Airheads Beemer Club
www.airheads.org
The Beautiful Black Hills of South Dakota
75 R90/6, 03 KLR650, 79 R100RT
.
.
____________________________________________________________
Penny Stock Jumping 3000%
Sign up to the #1 voted penny stock newsletter for free today!
http://thirdpartyoffers.juno.com/TGL3141/4e34c9c9ae2d52e684dst02vuc
exhaust header nut torque spec?
Posted: Sat Jul 30, 2011 10:40 pm
by Michael Martin
Using the general torque specs (for fasteners that do not have a
specification), an 8mm thread diameter shows 14 ft-lb, according to my
Clymer manual.
Mike Martin,
Louisville, KY
________________________________
From: Flower Jamie
Hey, anybody know the torque value for the nuts that hold the header to the head? Thanks!
[Non-text portions of this message have been removed]
need headlight frame for a13 in n. calif. usa
Posted: Tue Aug 16, 2011 7:45 pm
by JWF
It's Kawa part number 23005, "BODY-COMP-HEAD LAMP", $30 at BikeBandit. Anyone got a spare one? It's the metal frame around the headlight lens, to which is mounted the lens, adjuster screw and bolt, etc. The flange where the vertical adjuster bolt attaches is cracked through, as though someone (not me this time, I swear) tried to force the headlight up or down without loosening the adjuster bolt.
I'd buy it, or trade you a Kisan Tailblazer (brand new), a Signal Dynamics BackOff (never opened), my first-born daughter, or other stuff... -JWF