Wilsons Sandbox

1)Sperian machinist face shield lens replacement to replace pre08 windshield; $10 with shipping 2)Pull the vacuum hose between the carb and tank then cable tie to bleeder, next cable tie/join/use cheap $2 translucent plastic tubing from Home Depot to bleed your brakes into a bottle. You can see the air and dirty brake fluid come out through the plastic tubing. 3)HID slim ballast kit from China; can be had for $2 plus $20 shipping sometimes. 4)Get less than 1 foot of 1 inch PVC pipe with 2 end caps. Put your reg and proof of insurance in it and multi cable tie it somewhere on your bike. 5)Get a cheap used Ninja radiator fan/motor to replace the KLR setup. They cost 1/3 as much and are widely available.