Wilsons Sandbox

http://i943.photobucket.com/albums/ad278/halgot1/ssklrbrakes001.jpg http://i943.photobucket.com/albums/ad278/halgot1/ssklrbrakes002.jpg I actually used the vacuum hose that goes from top of carb to petcock and attached it to the bleeder valve. Then that translucent plastic hose that is avail from Home Depot for a buck from the hose to a beaker which had brake fluid in it. It was a one man job though easier with two people. So, list of items: 1)translucent plastic hose from Home Depot. 1 Buck 2)carb/petcock vacuum hose--just take off the KLR 3)Quart of brake fluid. Actually a pint is fine if you have someone helping--then you won't spill/waste much. $72 4)2 cable ties to make sure air doesn't get in hose. 5)Container to put hose in so air doesn't get in. Stainless steel brake line kit and ordinary tools. J#3