Wilsons Sandbox

A while back someone posted a link to a hand-drawn wiring diagram that showed how install a double-throw switch to either leave the circuit stock using the radiator-mounted thermo-switch or turn the fan on manually. Seems to me to be the best of both worlds. Can't remember if the switch was double-pole or single-pole but it was definitely a double throw switch. The third position of the switch disabled the fan completely if I recall correctly. Ring any bells? Is it in the files section? -- ian http://www.scarletfuries.com http://www.facebook.com/pages/The-Scarlet-Furies/121218125931 [Non-text portions of this message have been removed]

There is a current thread on ADV were it wasn't the guy's chain that caused problems, it was his rear sprocket which came off and wrapped around the swingarm while he was going down the highway. This on a new Husky TE630 with less than 1000 miles on it! http://www.advrider.com/forums/showthread.php?t=706535 -- Kevin Powers White Bear Lake, MN

On Thu, Aug 4, 2011 at 12:38 PM, Jeffrey wrote: > ** > > > I did a ride with a character who lives in La Verne, CA. After the dirt > riding, I noticed how bad his chain looked. It was missing some rollers. It > wasn't spitting roller though. I told him to ride slowly. Despite my advice, > he road psycho; over 80 on the fwy with the chain like that. He made it back > which surprised me. I thought it was total mental. > > J#3 > > > [Non-text portions of this message have been removed]