Wilsons Sandbox

--- On Sun, 6/5/11, Jeff Khoury wrote: From: Jeff Khoury Subject: Re: [DSN_KLR650] 09 Head light just burned out To: "Jeff Saline" Cc: "DSN KLR650" DSN_KLR650@yahoogroups.com>, kjedick@... Received: Sunday, June 5, 2011, 4:58 AM I don't remove the lower fairing, just the entire "cowl". Undo the screws on top of the cowl, the allen bolts in the dash and the two down inside between the tank and the cowl. You can then gingerly slide the cowl and headlight assembly forward and tilt it down to change the bulbs. That's how I do it anyway. -Jeff Khoury From: "Jeff Saline" To: kjedick@... Cc: "DSN KLR650" DSN_KLR650@yahoogroups.com> Sent: Saturday, June 4, 2011 7:29:47 PM Subject: Re: [DSN_KLR650] 09 Head light just burned out On Sun, 05 Jun 2011 01:47:23 -0000 "kjedick" < kjedick@... > writes: > Hello all, > > Is there a easier way to put in a new Head Light bulb in my 09. I > read my Clymer manual and it says to remove both upper and lower > fairing. ( I have the Happy trails front guards also ) > > Ken Colorado <><><><><><><> <><><><><><><> Ken, I have almost no experience on the new version KLRs. But I did recently read of a guy that said he changed his H7 headlight bulbs by going in from the bottom. I kind of recall there was a panel with four screws he removed. Sorry I can't be positive about the procedure. Best, Jeff Saline ABC # 4412 South Dakota Airmarshal Airheads Beemer Club www.airheads.org The Beautiful Black Hills of South Dakota 75 R90/6, 03 KLR650, 79 R100RT . . __________________________________________________________ Groupon.com Official Site 1 huge daily deal on the best stuff to do in your city. Try it today! http://thirdpartyoffers.juno.com/TGL3141/4deaeacc5fee821945cst06vuc [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]