my speedo was indicating 120 mph on the fwy
Posted: Mon May 02, 2011 2:18 pm
On Mon, 2 May 2011 13:23:56 -0500 Kevin Powers
writes:
<><><><><><> <><><><><><> Kevin, I pack the entire speedo drive on my 03 KLR with wheel bearing grease. I figure if it's full of grease it's not full of water. Best, Jeff Saline ABC # 4412 South Dakota Airmarshal Airheads Beemer Club www.airheads.org The Beautiful Black Hills of South Dakota 75 R90/6, 03 KLR650, 79 R100RT . . ____________________________________________________________ Groupon™ Official Site 1 ridiculously huge coupon a day. Get 50-90% off your city's best! http://thirdpartyoffers.juno.com/TGL3141/4dbf035d11bf21e277est01vuc> I was just replacing a front tire yesterday, and in the process > cleaned the > the old black gunk out of the speedo drive. I found myself > wondering just > what the correct amount of grease is for that part? I put some on > the gears > and on the rotating surfaces, but it seems there is a lot of empty > space in > that assemble - it isn't supposed to be completely packed with > grease is it? > > -- > Kevin Powers > White Bear Lake, MN