complete rebuild gasket sets

DSN_KLR650
Post Reply
Retread
Posts: 5
Joined: Wed Mar 16, 2011 4:48 pm

nklr: krylon fusion paint

Post by Retread » Wed Mar 16, 2011 4:48 pm

I followed some conversations regarding this plastic paint, then decided to try a can. It is easily the worst paint that I have ever bought. It didn't spray in a fine mist, rather it splattered in a liquidy mess - very splotchy. I could more easily used rhino liner - it looks the same. Any similar experience with this stuff? Don

Eddie
Posts: 472
Joined: Sat Jun 03, 2000 9:42 am

nklr: krylon fusion paint

Post by Eddie » Wed Mar 16, 2011 4:53 pm

Either you got a bad can or it wasn't warm enough or fully mixed. I bought a fender extension for my GL1800 and sprayed it semi-gloss black with Fusion and it turned out great - Nice & smooth. eddie
> [Original Message] > From: Retread > To: DSN_KLR650@yahoogroups.com> > Date: 3/16/2011 5:48:06 PM > Subject: [DSN_KLR650] NKLR: Krylon Fusion Paint > > > I followed some conversations regarding this plastic paint, then decided
to try a can.
> > It is easily the worst paint that I have ever bought. It didn't spray in
a fine mist, rather it splattered in a liquidy mess - very splotchy.
> > I could more easily used rhino liner - it looks the same. > > Any similar experience with this stuff? > > Don > > > > > ------------------------------------ > > List Sponsors - Dual Sport News: http://www.dualsportnews.com > Arrowhead Motorsports: http://www.arrowheadmotorsports.com > List FAQ courtesy of Chris Krok: http://www.bigcee.com/klr650faq.html > Member Map:
http://groups.yahoo.com/group/DSN_KLR650/app/peoplemap/view/map
> Group Apps:
http://groups.yahoo.com/group/DSN_KLR650/grouplets/subscriptionsYahoo! Groups Links
> > >

Eddie
Posts: 472
Joined: Sat Jun 03, 2000 9:42 am

nklr: krylon fusion paint

Post by Eddie » Wed Mar 16, 2011 4:53 pm

Either you got a bad can or it wasn't warm enough or fully mixed. I bought a fender extension for my GL1800 and sprayed it semi-gloss black with Fusion and it turned out great - Nice & smooth. eddie
> > > > [Original Message] > > From: Retread > > To: DSN_KLR650@yahoogroups.com> > > Date: 3/16/2011 5:48:06 PM > > Subject: [DSN_KLR650] NKLR: Krylon Fusion Paint > > > > > > I followed some conversations regarding this plastic paint, then
decided to try a can.
> > > > It is easily the worst paint that I have ever bought. It didn't spray
in a fine mist, rather it splattered in a liquidy mess - very splotchy.
> > > > I could more easily used rhino liner - it looks the same. > > > > Any similar experience with this stuff? > > > > Don > >

mark ward
Posts: 1027
Joined: Fri Jan 15, 2010 11:18 am

nklr: krylon fusion paint

Post by mark ward » Wed Mar 16, 2011 5:02 pm

I've bought a can of spray paint that splattered, and had also noticed someone must have done a test spray, because a tiny of dry paint was on the tip, and INSIDE IT, causing the uneven spray, Cleaned it out well and was OK. (NOW I DBL, check before buying.)
--- On Wed, 3/16/11, eddie wrote: From: eddie Subject: [DSN_KLR650] NKLR: Krylon Fusion Paint To: "KLR650 list" DSN_KLR650@yahoogroups.com> Date: Wednesday, March 16, 2011, 9:53 PM Either you got a bad can or it wasn't warm enough or fully mixed. I bought a fender extension for my GL1800 and sprayed it semi-gloss black with Fusion and it turned out great - Nice & smooth. eddie > > > > [Original Message] > > From: Retread > > To: DSN_KLR650@yahoogroups.com> > > Date: 3/16/2011 5:48:06 PM > > Subject: [DSN_KLR650] NKLR: Krylon Fusion Paint > > > > > > I followed some conversations regarding this plastic paint, then decided to try a can. > > > > It is easily the worst paint that I have ever bought. It didn't spray in a fine mist, rather it splattered in a liquidy mess - very splotchy. > > > > I could more easily used rhino liner - it looks the same. > > > > Any similar experience with this stuff? > > > > Don > > [Non-text portions of this message have been removed]

Jeff Khoury
Posts: 684
Joined: Tue Mar 31, 2009 11:08 am

nklr: krylon fusion paint

Post by Jeff Khoury » Wed Mar 16, 2011 5:02 pm

I paint a lot of stuff on bikes. Fusion usually comes out looking ok, but due to the nature of being a "plastic paint", it never really cures to a finish I would call "good-looking". However if you're painting Polypropylene plastic (like the KLR's fenders / Side panels / handguards) it's either that or bedliner. I go with the bedliner, Duplicolor brand. Prep is simple. Sand with an orbital and 220 grit to rough the surface, wipe with alcohol to remove waxes, oils and dust... then just spray it on in multiple medium-thickness coats. It cures flexible and adheres well, provided you did your prep properly. If you're looking to paint ABS plastic (Like the '08+ fairings/cowling), a traditional paint will work. -Jeff Khoury From: "eddie" To: "KLR650 list" DSN_KLR650@yahoogroups.com> Sent: Wednesday, March 16, 2011 2:53:10 PM Subject: [DSN_KLR650] NKLR: Krylon Fusion Paint Either you got a bad can or it wasn't warm enough or fully mixed. I bought a fender extension for my GL1800 and sprayed it semi-gloss black with Fusion and it turned out great - Nice & smooth. eddie
> > > > [Original Message] > > From: Retread < doninwoodlands@... > > > To: < DSN_KLR650@yahoogroups.com > > > Date: 3/16/2011 5:48:06 PM > > Subject: [DSN_KLR650] NKLR: Krylon Fusion Paint > > > > > > I followed some conversations regarding this plastic paint, then
decided to try a can.
> > > > It is easily the worst paint that I have ever bought. It didn't spray
in a fine mist, rather it splattered in a liquidy mess - very splotchy.
> > > > I could more easily used rhino liner - it looks the same. > > > > Any similar experience with this stuff? > > > > Don > >
[Non-text portions of this message have been removed]

eddiebmauri
Posts: 205
Joined: Sun May 07, 2006 7:42 am

nklr: krylon fusion paint

Post by eddiebmauri » Thu Mar 17, 2011 5:14 am

I used Krylon (flat black) to paint an International Safety Orange (color) Pelican Box ( sanded the box first) and it looks OK, but in some areas where there is wear/rubbing the Krylon rubbed off. Easy fix, just hit it again. Next time I will try bed liner and not paint though. Eddie
--- In DSN_KLR650@yahoogroups.com, Jeff Khoury wrote: > > I paint a lot of stuff on bikes. > > Fusion usually comes out looking ok, but due to the nature of being a "plastic paint", it never really cures to a finish I would call "good-looking". However if you're painting Polypropylene plastic (like the KLR's fenders / Side panels / handguards) it's either that or bedliner. > > I go with the bedliner, Duplicolor brand. Prep is simple. Sand with an orbital and 220 grit to rough the surface, wipe with alcohol to remove waxes, oils and dust... then just spray it on in multiple medium-thickness coats. It cures flexible and adheres well, provided you did your prep properly. > > If you're looking to paint ABS plastic (Like the '08+ fairings/cowling), a traditional paint will work. > > -Jeff Khoury > > > > From: "eddie" > To: "KLR650 list" DSN_KLR650@yahoogroups.com> > Sent: Wednesday, March 16, 2011 2:53:10 PM > Subject: [DSN_KLR650] NKLR: Krylon Fusion Paint > > > > > > > > > Either you got a bad can or it wasn't warm enough or fully mixed. > > I bought a fender extension for my GL1800 and sprayed it semi-gloss black > with Fusion and it turned out great - Nice & smooth. > > eddie > > > > > > > [Original Message] > > > From: Retread < doninwoodlands@... > > > > To: < DSN_KLR650@yahoogroups.com > > > > Date: 3/16/2011 5:48:06 PM > > > Subject: [DSN_KLR650] NKLR: Krylon Fusion Paint > > > > > > > > > I followed some conversations regarding this plastic paint, then > decided to try a can. > > > > > > It is easily the worst paint that I have ever bought. It didn't spray > in a fine mist, rather it splattered in a liquidy mess - very splotchy. > > > > > > I could more easily used rhino liner - it looks the same. > > > > > > Any similar experience with this stuff? > > > > > > Don > > > > > > > > [Non-text portions of this message have been removed] >

gjbellinger
Posts: 7
Joined: Tue Mar 15, 2011 9:34 pm

complete rebuild gasket sets

Post by gjbellinger » Fri Mar 18, 2011 8:04 pm

ANY ONE HAVE A GOOD SOURCE TO GET COMPLETE GASKET SETS??

Post Reply

Who is online

Users browsing this forum: No registered users and 25 guests