baby's restoration
Posted: Sun Mar 06, 2011 9:39 am
Over cast & 45........I've got SUNNY & 24 F.
Where is your global warming HEATWAVE?
We are SUPPOSED to get to the 40's this week, I and VERY tempted to take of heading south for a couple of weeks UNTILL ..............it's warm enough and streets clean of ice agian to come home.
Many yr's in Mi. We get an almost summer weather for a few weeks in march, THEN BAM a last BIG SNOW. Often the biggest of the yr.
Mark (W. Mi.)
--- On Sun, 3/6/11, Andrus wrote: From: Andrus Subject: [DSN_KLR650] Baby's restoration To: DSN_KLR650@yahoogroups.com Date: Sunday, March 6, 2011, 2:30 PM I is great fun for my hands and eyes to roam over my old bike. All plastic is on the bench now for sanding and painting. Gas tank has a bit of rust underneath but clean inside. So, a bit of sanding and prime and paint. The upper surface is still in great shape so not gonna mess with it. Tires and turn signals being replaced. Next phase is to pressure wash it, dry it and start on the mechanical stuff. See both fork seals weeping so I'll just start on the front first. Forks apart, cleaned and all bearing in the wheels and steering stem checked. But, today is overcast, north wind and 45 degrees out there and this old dude don't have to work in the shop till it's back to comfortable.I'm just not understanding the problem with the brake fluid bleed / change out. I guess because I've done so many times, alone, and pumping. But I do have a vac pump also. Depends on my mood if in I use it or not. [Non-text portions of this message have been removed]