Page 1 of 1
engine didn't sieze
Posted: Thu Sep 23, 2010 8:48 pm
by Jeffrey
It was just the battery. Though checking for shorts; source of smell.
Jeffrey #3
problem with front brake
Posted: Fri Sep 24, 2010 2:21 pm
by Tom
I was going to change the brake pads on the front of my
A19 (2005) KLR 650 but I cannot get the pin out that goes through
both pads. This pin has a bolt type head on it and has a small
pin going through it. I sprayed brake cleaner on the caliper and then
I used a solvent on it. It won't move. I tried a socket head on it
and that did not work. Any suggestions?
Tom
SW Pa.