Wilsons Sandbox

Also, If you shock the bolts with a good whack from a hammer and flat head drift, it will break the corrosive bond the bolt has and will come out easier. Certainly spray it down with pen oil and let it sit overnight. TK [b]From:[/b] Jeff Khoury [b]To:[/b] advrider2015 [b]Cc:[/b] "DSN_KLR650@yahoogroups.com" DSN_KLR650@yahoogroups.com> [b]Sent:[/b] Sun, March 14, 2010 5:43:13 PM [b]Subject:[/b] Re: [DSN_KLR650] Subframe bolt removal help   Spray with penetrating oil first. Add heat. Use a ratchet with an Allen socket.  Usually works for me. If that doesn't work, try an impact wrench with the above mentioned Allen socket.  -Jeff Khoury

On Mar 14, 2010, at 2:25 PM, "advrider2015" wrote:

  Hi Troops, I'm installing the Motech crash bars,and need to remove the upper subrame bolts. My six inch allen wrench doesn't seem to have the leverage needed to reverse the bolt, even with a pipe extension. Before I twist off the bolt heads is there something else I should use or do to back them out easier? The Motech includes two stronger bolts so you only remove one side at a time and don't need to drill anything. Thanks George Duluth