klr650 : re-jetting results
Posted: Sat Jun 20, 2009 9:51 am
All,
Put everything back together WITH NO LEFT OVER PARTS ,started the bike,crank,crank, until bowl filled up,good start, good idle,since I've installed the ThermoBob I know when the engine is warmed up,reved up the thumper, 2000 holding steady, 3-4-5000 RPM still holding steady,let's do a quick RED LINE ( I really do not like to do that with no load ), I was at 5000rpm and holding steady, flicked the wrist,wide open throttle, 5500-6000rpm thumper quits rpm dropped to 5000 then surges back to 6000,quits,drops to 5000,surges again to 6000 ,just like a bellow--> inflate-->deflate-->inflate-->deflate.
The Thumper did not do that before,so what is it ? Fix ?
Thanks
( By the way,that darn mutt of mine does not bite me any longer,he just pees on my shoes with disdain !! )