Page 1 of 1
[dsn_nklr650] big gun exhaust for klr
Posted: Tue Nov 25, 2008 5:20 pm
by RM
On Tue, 25 Nov 2008 11:15:51 -0800, "Stuart Mumford"
said:
> However, I certainly wouldn't want to be in the midst of a 2000 mile
> week-long motorcycle camping trip, packing my exhaust around the
> campfire.
Stu prefers to have someone else "pack his exhaust" around remote desert
campfires. Just sayin'.
RM
battery charger pigtail
Posted: Tue Nov 25, 2008 7:29 pm
by dooden
But a Battery Tender comes with changeable ends that happen to use a
2-Way connector. So I stayed with it and cut off the ends of the
small M/C charger I also had so I can just plug it directly into the
2-Way coming off the battery so I can use either charger without
thinking about it, just plug it in and charge.
But I understand what you did.
Also my way I can just install a 2-Way on any 12v thing I need to run
and just plug into the bike. (no aux 12v on my bike like a cig
lighter plug)
Whatever works is always the best thing hey.
Dooden
A15 Green Ape
--- In
DSN_KLR650@yahoogroups.com, "nakedwaterskier"
wrote:
>
> I find it easier to run just 1 wire; a hot battery terminal wire to an
> insulated female bullet crimp connector. With the round female
> insulated crimp connector, you can just stick in a screw or proper
> uninsulated male bullet crimp connector. Then I can clip my trickle
> charger or regular charger RED lead to the screw or male connector. The
> chargers BLACK can be clipped onto any ground on my motos and there are
> at least a dozen easy ground spots on most motorcycles.
>
> Jeffrey
>