brake lock

[dooden]

Reverse the pieces and you will notice when sliding together they stay almost square too. Have also used them to push the pads back into caliper also when given an extra push. Works pretty good hey. Dooden A15 Green Ape

--- In DSN_KLR650@yahoogroups.com, Bogdan Swider wrote: > > Got this tip from this very list years ago: Take a clothes pin apart. After > you take the caliper off, insert the pieces between the pads to keep them in > position. I now keep an apart clothes pin with my tire changing stuff. > > Bogdan, who wonders if Heloise was on the list back then > > > On 9/11/08 12:33 PM, "boulder_adv_rider" > wrote: > > > > > > > > > I'd follow what Jeff suggests. Most likely it's a brake pad issue. > > > > It's possible to bump a brake pad when reistalling the wheel and > > fitting the rotor into the caliper between the pads and it binds in > > some out-of-position way. Jeffs, recommendation find/should fix > > this. > > > > > > [Non-text portions of this message have been removed] >