Page 1 of 1
anybody put vista cruise on an 08 yet??
Posted: Mon Aug 25, 2008 8:19 pm
by Christopher Eckert
I got a Vista cruise last week and tried to test fit it this afternoon.
Doesnt look like it fits given a cursory glance. There is a lip on the
inside of the the grip that the thicker part of the locking mechanism
is hitting. Dont want to pull it apart before asking the obvious
question. Has anybody put one on an 08 before?
I have the one used on MarkNet, link below, purchased from
http://www.arrowheadmotorsports.com/, and being their part number 12-
7130 as seen in their store under KLR650/control. WOW, what the hell
did I just say? Gotta stop working with all those layers.
I was planning to use the nicely done instructions at
http://www.klr650.marknet.us/vistacruise.html. I fear they may have
changed the throttle a bit for 08 but havent pulled the grip off to see
yet. Much easier to ask the stupid question first.
anybody put vista cruise on an 08 yet??
Posted: Mon Aug 25, 2008 9:12 pm
by Jeff Saline
On Tue, 26 Aug 2008 01:19:47 -0000 "Christopher Eckert"
writes:
> I got a Vista cruise last week and tried to test fit it this
> afternoon.
> Doesnt look like it fits given a cursory glance. There is a lip on
> the
> inside of the the grip that the thicker part of the locking
> mechanism
> is hitting. Dont want to pull it apart before asking the obvious
> question. Has anybody put one on an 08 before?
SNIP
<><><><><><><><><><>
<><><><><><><><><><>
Christopher,
A local guy did the Vista Cruise on his 08. I didn't pay too much
attention to it other than to see that it works. I might be riding with
him on Wednesday for a few miles in the hills and if that happens I'll
try to get a photo or two for you.
I don't think it's a big deal to install it in a manner similar to what
is shown on the site you referenced.
Martin Earl and I did one last week on his 98? when we also added heated
grips. For the earlier models I like to use two pieces of metal to hold
the device in place.
Best,
Jeff Saline
ABC # 4412 South Dakota Airmarshal
Airheads Beemer Club
www.airheads.org
The Beautiful Black Hills of South Dakota
75 R90/6, 03 KLR650, 79 R100RT
____________________________________________________________
Click to replace your roof - modern technology.
http://thirdpartyoffers.juno.com/TGL2141/fc/Ioyw6i3nHHNt2nzTEMxRtwqSXcopankLSSLS8PeLMAP8h19W2DkVve/
front fender farkle brace question
Posted: Mon Aug 25, 2008 10:08 pm
by eddiebmauri
I have seen in some photos of KLR's a brace for the KLR's front
fender, who makes that brace, is it worth the investment, and where
can I get one? The brace that I have seen looks like something right
out of the Road Warrior movie. Any info would be appreciated. Also,
any of you got a used one for sale?
Eddie (03' KLR - "la poderosa)