Wilsons Sandbox

Posted: **Sun Aug 17, 2008 3:59 pm**

Just got an 07. Any recommendations on what the best highway pegs are? [Non-text portions of this message have been removed]

Posted: **Wed Aug 20, 2008 9:31 pm**

Jorg - Make sure the seal retainers are properly installed. Next, spray some oil around the seals directly on the fork tube (I use cable lube). You might be getting some stiction which can make weird noises. --- In DSN_KLR650@yahoogroups.com, "kent.jorgenson" wrote:

> > Thanks for those who contributed on my progressive tight side up or > down quandry. I decided I would give tight side up a shot. All

looks

> good put it back together and I have a scratchy sound on depression. > Can't be good. I added the for oil to 190mm while compressed spring > out. Put in my spacers with washer underneath. Seals appear to > working no oil no binding, bleeded off any extra air pressure. I am > sure it is something simple but if anyone has any input I'll take it. > > jorg >

Wilsons Sandbox

tight side up...

highway peges

tight side up...