klr650:: puzzled (?)

[Kerry Stottlemyer]

That would be the one I used. Kerry

--- In DSN_KLR650@yahoogroups.com, Randall Marbach wrote: > > Once I get my $2800 rebuilt DRZ440 engine back in the frame, I plan to use this procedure.. > > http://mototuneusa.com/break_in_secrets.htm> > > HTH > Randy from Burbank > > > ----- Original Message ---- > From: Luc Legrain > To: DSN_KLR650@yahoogroups.com > Sent: Monday, May 26, 2008 8:43:05 AM > Subject: [DSN_KLR650] klr650:: Puzzled (?) > > I stumbled on a site,that I'm sure y'all know about, > "motorcycleinfo.calsi". It blew my mind ( whatever is > left of it) I read about " Breaking-in new bike > ",since I'm ready to get a new one (V Strom 1000)--- I > saved up by using my wife's > razors,stockings,panties,cutting down to one case of > beer a week,salads,..---- I'm asking for some > enlightened infos. > Should one follow the directions in the manual,or is " > fast and hard " the way to go ? > Luc. > ( on my way to get 3 cases of beer) > > > > > ------------------------------------ > > List sponsored by Dual Sport News at: www.dualsportnews.com > List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html > Member Map at: http://www.frappr.com/dsnklr650Yahoo! Groups Links >

[clutz003]

I am in the process of doing swingarm maint. Following instructions at Marknet (have done it before with no issues). I have removed all bolts etc and am at the stage where upon pulling the main mounting bolt the swingarm should drop down. The left hand side is free and clear but the right hand side is hung up. No amount of pulling/pushing, jiggling tapping with rubber mallet etc has worked. Any suggestions? Id do not want to get to aggressive with it and mess something up. Thanks, Craig A18 San Jose CA