outer brake paddy
Posted: Sat May 24, 2008 3:02 pm
--- Jacobus De Bruyn wrote:
Jake, The pad closest to the wheel is a little bit loose on the pins. I can move it in and out with my fingers. The holes in the pad are square, with rounded corners, and the pins are round. Mike Martin, Louisville, KY> I found the rear brake still got pretty warm. It > seems to me that the outer brake pad, the one nearest > to the wheel, is not sliding as it should. > I installed the new cheapo brake pads, which by the > way are the only ones available here, -with luck, > occasionally- and I found that I had to file down the > square holes to fit the round slide pins. It looks to > me that they still need a bit more filing. > Dem pins dem, dem round, mon. Ask Harry Belafonte. > Mike, the outer brake pads should slide freely on the > round slide pins? Early tomorrow I ll get out my > beginners burglary kit with the round file, and make > it slide easily, except of cause if I get a > prohibition on this channel. From authorized persons.