side stand safety bypass

[hotfoot777]

------------------------------------------------------------------------ -------- My house was a 1971 doublewide with two bathrooms. Years ago it was bricked in and some rooms added but it still had that tiny 4 foot somthing tub only 10 inches deep. Im 6'6" and i didnt fit to well in the tub or shower. I have lived here 12 years and the original head was getting shitty. Here is a link to my remodel. What makes this so worthy is if i hired someone to do this it would cost a small fortune This way i come out like a mexican bandit http://www.enchantdesigns.com/bathroom.html

[Tumu Rock]

--- In DSN_KLR650@yahoogroups.com, "hill_buster" wrote:

> > Did the safety bypass last night. Cut the wires directly above the > switch, soldered together & the bike started. > > What I found surprising is that the bike would start in 1st gear and > the tire turn when the clutch was released, whether the 2 wires were > connected or not. No mistake in choosing the wires as I followed the > directions at www.klr650.marknet.us > > hmmm..... > > hill_buster >

I don't think the sidestand safety switch affects the clutch safety switch. Is the clutch safety switch defeated as well? da Vermonster