switch won't take key
Posted: Sat Jan 12, 2008 10:22 am
Top Posted cause well... I like it that way...
Think PBBlaster is a good penatrant ? I have been using Golden Eagle
brand "Fogging Oil", mostly butane with some light oil mixed in it.
Must be the butane that makes it all bubble up on contact, but you
can actually watch the spray wick right into the rusted threads.
Dooden
A15 Green Ape (Hibernating)
--- In DSN_KLR650@yahoogroups.com, "Jake Wilson" wrote: > > --- In DSN_KLR650@yahoogroups.com, "Bill Shanks" wrote: > > > > Thanks, guys, for all the suggestions. They were all helpful and > > logical. They didn't work. Feeling around with a long brad, I think > a > > pin is stuck and won't move. I blew, flushed with WD-40, picked, > > tapped, cussed, heated, cussed some more(heat source), wiggled, all > > with no luck. I'm going to wait for the WD-40 to soak in and try > again. > > > > I'll keep you posted. > > > > Bill > > > > > > > ~~~~Pick up a can of PB Blaster and spray that into the lock. It is > the best penetrant you can buy. WD 40 is a 'water dispersant' and not > a penetrant. Trust me on this, PB Blaster is what you want to use > > > > > > Jake > Reddick Fla. >