hacksaw

[Alan L Henderson]

I have to remember this. I have the compressor and a air impact tool with necessary bits. Some electric hammer drills can be set to hammer only or if you chucked up a semi dull center punch you could use one that hammered and rotated. Alan A13 Iowa Tengai Mark Van Horn wrote:

> Last week, I removed an engine from a '90 Tengai. I got the swingarm > bolts, which were severely seized and corroded, out VERY easily with > an air impact hammer operating at 90psi. I used the pointed tip for, > drilled a pilot dimple in the end of the bolt to hold the hammer tip, > leaned into it and zzzzap, zap, zap, the bolts came right out. > > Mark >