Page 1 of 1
head pipe
Posted: Wed Jun 12, 2002 10:37 pm
by Tony Cornett
Hello everyone. I am looking for a stock klr650 head pipe complete. I am going to ceramic coat header and stock muffler. Haas anyone tried this? If so with what results. Thanks TC
[Non-text portions of this message have been removed]
head pipe
Posted: Wed Jun 12, 2002 11:10 pm
by kcuf_oohay_666
Yes. I put an insulation wrap on my head pipe (double insulation).
The head pipe split on the inside of the 180 degree bend coming off
the cylinder head. I thibk It got too hot inside. I did notice better
fuel economy but no seat of the pants improvment on power. I didn't
run a dyno test. The insulation wrap worked great while it lasted.
After riding for an hour you could rech down and grab the insulated
pipe for 1 to 2 seconds with out burning your hane. It lasted about 9
months till the head pipe split. I brazed it back together.
Other people I know with Honda XR and Quads run the ceramic coating
and say they get more power. But you have to watch out for the KLR's
multi-piece head pipe coming apart.
--- In DSN_klr650@y..., "Tony Cornett" wrote:
> Hello everyone. I am looking for a stock klr650 head pipe complete.
I am going to ceramic coat header and stock muffler. Haas anyone
tried this? If so with what results. Thanks TC
>
>
> [Non-text portions of this message have been removed]
head pipe
Posted: Sat Sep 14, 2002 12:08 am
by Tony Cornett
I am looking for a well used head pipe for KLR 650. Does not have to be in great shape. I am only going to use first portion for a new pipe that I will be making. Thanks TC
[Non-text portions of this message have been removed]
head pipe
Posted: Sat Nov 23, 2002 8:14 pm
by Tony Cornett
I need a KLR650 head pipe, actually I only need the portion that enters the head. I want to build a new exhaust system and I am not sure that I could reproduce the rectangular portion that enters the head. Does anyone know if these sections are sold separately? Thanks for any help TC
[Non-text portions of this message have been removed]
head pipe
Posted: Tue Jan 23, 2007 6:57 pm
by dmcjeeper
does anyone here know of anyone that makes a replacement headpipe for
the 650? I replaced the exhaust pipe and the ugly head pipe looks
uglier now. thx
head pipe
Posted: Tue Jan 23, 2007 7:27 pm
by Harry Seifert
BigGun, available through Fred.
Harry Seifert
bseifert71@...
> [Original Message]
> From: dmcjeeper
> To: DSN_KLR650@yahoogroups.com>
> Date: 1/23/2007 4:57:19 PM
> Subject: [DSN_KLR650] Head Pipe
>
> does anyone here know of anyone that makes a replacement headpipe for
> the 650? I replaced the exhaust pipe and the ugly head pipe looks
> uglier now. thx
>
>
>
> Archive Quicksearch at:
http://www.angelfire.com/ut/moab/klr650_data_search.html
handle bars
Posted: Wed Jan 24, 2007 2:46 pm
by dooden
Have you tried a simple adjustment yet ?
Loosen them and rotate forward or back, depending on how the dealer
placed them.
Pushed forward I can handle the OEM bars, by the way the dealer
installed them I could'nt stand on the pegs and ride they were so far
back.
Dooden
A15 Green Ape
--- In
DSN_KLR650@yahoogroups.com, "rhood1960" wrote:
>
> ANY IDEAS ON DIFFERENT HANDLE BARS ? 07 KLR.DONT LIKE THE STOCK BARS
> ANT SUGGESTIONS.
>