Wilsons Sandbox

Posted: **Mon Feb 27, 2006 2:42 pm**

My CVK had a hole in the diaphram. I have it all disassembled and ready to replace. Fred from Arrowhead sez there is a Harley part which is the same as Kaw's, only bunches cheaper. Before I go into the dealership, does anyone know the HD part number, or which bike it is off? (a Sportster of some kind, I think). Thanks for your help J Duncan Cooper Cleveland, OH

Posted: **Mon Feb 27, 2006 2:49 pm**

On 2/27/06, Duncan Cooper wrote:

> Before I go into the dealership, > does anyone know the HD part number, or which bike it is off? (a > Sportster of some kind, I think). Thanks for your help

It's been posted to the list in the past; try searching the archives. -- Blake Sobiloff http://sobiloff.typepad.com/> San Jose, CA (USA)

Posted: **Mon Feb 27, 2006 3:06 pm**

--- In DSN_KLR650@yahoogroups.com, "Duncan Cooper" wrote:

> > My CVK had a hole in the diaphram. I have it all disassembled and ready > to replace. Fred from Arrowhead sez there is a Harley part which is the > same as Kaw's, only bunches cheaper. Before I go into the dealership, > does anyone know the HD part number, or which bike it is off? (a > Sportster of some kind, I think). Thanks for your help > > J Duncan Cooper > Cleveland, OH >

Harley dealers carry a slide/diaphragm assembly, part number 27585-88, for Kehin CVK40 carbs. List price is usually around $40. For a temporary repair, Park Tool makes small, clear, flexible patches for bicycle tubes that will do the job. Pulled from the KLR650 FAQ maintained by Chris Krok - El Krokko! (not verified by me, but I'm 99.9% sure it's right - let us know, ok?) all the best, Mike

Posted: **Mon Feb 27, 2006 5:31 pm**

Duncan, Try an 883 Sportster. Should be the same part. Last time I checked locally they had 5 on the shelf for about $45. Best, Jeff Saline ABC # 4412 South Dakota Airmarshal Airheads Beemer Club www.airheads.org The Beautiful Black Hills of South Dakota 75 R90/6, 03 KLR650, 79 R100RT On Mon, 27 Feb 2006 20:42:00 -0000 "Duncan Cooper" writes:

> My CVK had a hole in the diaphram. I have it all disassembled and > ready > to replace. Fred from Arrowhead sez there is a Harley part which is > the > same as Kaw's, only bunches cheaper. Before I go into the > dealership, > does anyone know the HD part number, or which bike it is off? (a > Sportster of some kind, I think). Thanks for your help > > J Duncan Cooper > Cleveland, OH > > > > > > Archive Quicksearch at: > http://www.angelfire.com/ut/moab/klr650_data_search.html > List sponsored by Dual Sport News at: www.dualsportnews.com > List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html > Member Map at: http://www.frappr.com/dsnklr650 > Yahoo! Groups Links > > > > > > > >

Posted: **Mon Feb 27, 2006 6:52 pm**

I think I saw one on EBay

On Feb 27, 2006, at 6:44 PM, thomasroznovsky wrote: > > Subject says it all, mine has a nasty dent in it. Anyone switching to > the plastic IMS tank, etc. want to help me out? > > sd_thom99@yahoo.com > > Thomas > > > > > > > Archive Quicksearch at: > http://www.angelfire.com/ut/moab/klr650_data_search.html > List sponsored by Dual Sport News at: www.dualsportnews.com > List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html > Member Map at: http://www.frappr.com/dsnklr650 > Yahoo! Groups Links > > > > > >

Wilsons Sandbox

wtb: ca-model gas tank (green/silver color)

carb diaphram help, please

carb diaphram help, please

carb diaphram help, please

carb diaphram help, please

wtb: ca-model gas tank (green/silver color)