Page 1 of 1
help chain broke and now bike wont start.
Posted: Fri Feb 17, 2006 3:31 pm
by Jeff Blessing
I commute on my klr650. The other day when riding home from work, the
chain snapped. Naturally i pulled over, noticed it broke at the master
link, installed a spare master and thinking all was good, pressed the
starter and then....the bike did not start. the engine turns,
compression seems good (mabye im assuming incorrectly that since air
comes out the exaust compression is good) but the bike wont start. Any
suggestions. Could the piston rod be broken. If it is broken, why
would i have compression. Any suggestions would be greatly appreciated.
help chain broke and now bike wont start.
Posted: Fri Feb 17, 2006 5:07 pm
by Gorm Larsen
Take off the cover for the front sprocket and check the wires just ahead of the sprocket. When your chain snapped it could very easily have damaged those wires.
Gorm L., BC, Canada
Jeff Blessing wrote:
I commute on my klr650. The other day when riding home from work, the
chain snapped. Naturally i pulled over, noticed it broke at the master
link, installed a spare master and thinking all was good, pressed the
starter and then....the bike did not start. the engine turns,
compression seems good (mabye im assuming incorrectly that since air
comes out the exaust compression is good) but the bike wont start. Any
suggestions. Could the piston rod be broken. If it is broken, why
would i have compression. Any suggestions would be greatly appreciated.
Archive Quicksearch at:
http://www.angelfire.com/ut/moab/klr650_data_search.html
List sponsored by Dual Sport News at:
www.dualsportnews.com
List FAQ courtesy of Chris Krok at:
www.bigcee.com/klr650faq.html
Member Map at:
http://www.frappr.com/dsnklr650
Yahoo! Groups Links
---------------------------------
Brings words and photos together (easily) with
PhotoMail - it's free and works with Yahoo! Mail.
[Non-text portions of this message have been removed]
cool british ad
Posted: Fri Feb 17, 2006 5:13 pm
by Dave Cairns
Wow, what a great commercial! I wish they had ads like that here in Canada.
Might get people to "think" before pulling out.
help chain broke and now bike wont start.
Posted: Fri Feb 17, 2006 5:49 pm
by Jeff Saline
Jeff,
Check the wires in front of the front sprocket. Maybe when the chain
came loose it mangled the wires.
Good luck,
Jeff Saline
ABC # 4412 South Dakota Airmarshal
Airheads Beemer Club
www.airheads.org
The Beautiful Black Hills of South Dakota
75 R90/6, 03 KLR650, 79 R100RT
On Fri, 17 Feb 2006 21:27:54 -0000 "Jeff Blessing"
writes:
> I commute on my klr650. The other day when riding home from work,
> the
> chain snapped. Naturally i pulled over, noticed it broke at the
> master
> link, installed a spare master and thinking all was good, pressed
> the
> starter and then....the bike did not start. the engine turns,
> compression seems good (mabye im assuming incorrectly that since air
>
> comes out the exaust compression is good) but the bike wont start.
> Any
> suggestions. Could the piston rod be broken. If it is broken, why
>
> would i have compression. Any suggestions would be greatly
> appreciated.
>
>
>
>
>
>
> Archive Quicksearch at:
>
http://www.angelfire.com/ut/moab/klr650_data_search.html
> List sponsored by Dual Sport News at:
www.dualsportnews.com
> List FAQ courtesy of Chris Krok at:
www.bigcee.com/klr650faq.html
> Member Map at:
http://www.frappr.com/dsnklr650
> Yahoo! Groups Links
>
>
>
>
>
>
>
>