taller bars
Posted: Tue Sep 06, 2005 9:09 pm
Date: Tue, 06 Sep 2005 18:25:45 -0000
From: "ash"
Subject: Taller bars and cables
In the quest for more back comfort, I'd like to fit some bars that are
at least an inch or two taller. I'm sure others have made the same
mod and I wonder if anyone has run into any problems with throttle and
clutch cable length. I'm sure my SS brake line will be long enough as
it's at least an inch or so longer than the stock item.
Also seeking suggestions for good bar choices that might fit the bill.
Alan
I have a higher rise handle bar on mine about 11/2 inch rise everything fit except clutch I had to move in inboard about a half an inch that is all. had to replace mine after bending originals in accident I could not find what I wanted [taller bars] in motorcycle bar in catalog at dealers went browsing in the atv handle bar section and found what I wanted They work fine look good and only cost $17.65 . they also came in red white.blue,and black I went for the black ones. the bend of the base is slightly wider but they mount just fine. I don't know what brand they were I just took measurements and ordered by size
Jim
south Arkansas
----------
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.10.18/90 - Release Date: 9/5/2005
[Non-text portions of this message have been removed]