Page 1 of 1

need a chain

Posted: Tue May 18, 2004 12:46 pm
by russmoes
Just bought a used KLR. It needs a new chain. Could someone advise on what to buy and where? A 520 106 links, right? Any other related advice is welcome. Thanks

need a chain

Posted: Tue May 18, 2004 1:42 pm
by Don Kime
I think this outfit has a decent price and good service: http://rockymountainatv.com/wc.dll?wwrmatv~type_name~0003981760~CH~CHAIN~DID+520+X%2DRING+Chain~~~ You'll need a 520 106 link, and it comes w/ a master link. Ride safe, Don Kime - VFR750F, GL1500SE, GL1100, KLR 650 OH - M/C Safety Instructor/RiderCoach dkime@... http://forums.delphiforums.com/MCTourer/ At 04:21 PM 5/18/04 +0000, russmoes wrote:
> >Just bought a used KLR. It needs a new chain. Could someone advise >on what to buy and where? A 520 106 links, right? > >Any other related advice is welcome. >Thanks > > > >List sponsored by Dual Sport News at www.dualsportnews.com. List FAQ >courtesy of Chris Krok at: www.bigcee.com/klr650faq.html >Unsubscribe by sending a blank message to: >DSN_klr650-unsubscribe@yahoogroups.com . > > >Yahoo! Groups Links > > > >

need a chain

Posted: Wed May 19, 2004 12:11 am
by Mike Torst
DID X-ring chain is swell! Mike Torst Las Vegas
> -----Original Message----- > From: russmoes [mailto:rmoes@...] > Sent: Tuesday, May 18, 2004 9:21 AM > To: DSN_klr650@yahoogroups.com > Subject: [DSN_klr650] need a chain > > Just bought a used KLR. It needs a new chain. Could someone advise > on what to buy and where? A 520 106 links, right? > > Any other related advice is welcome. > Thanks >

need a chain

Posted: Wed May 19, 2004 1:44 am
by aboyandhisdawg
which really suprises me... since DID bicycle chains are crap. i ran an RK chain on my last bike after using up the factry chain... had good performance and life from that. i'm still dubious about the DID that the PO installed on my KLR. fixer KLR A1 Lost Wages, NV --- In DSN_klr650@yahoogroups.com, "Mike Torst" wrote:
> DID X-ring chain is swell! > > Mike Torst > Las Vegas > > > -----Original Message----- > > From: russmoes [mailto:rmoes@m...] > > Sent: Tuesday, May 18, 2004 9:21 AM > > To: DSN_klr650@yahoogroups.com > > Subject: [DSN_klr650] need a chain > > > > Just bought a used KLR. It needs a new chain. Could someone advise > > on what to buy and where? A 520 106 links, right? > > > > Any other related advice is welcome. > > Thanks > >

need a chain

Posted: Wed May 19, 2004 9:15 am
by Doug Herr
On Tue, 18 May 2004, Don Kime wrote:
> I think this outfit has a decent price and good service: > > http://rockymountainatv.com/wc.dll?wwrmatv~type_name~0003981760~CH~CHAIN~DID+520+X%2DRING+Chain~~~ > > You'll need a 520 106 link, and it comes w/ a master link.
With all the talk of chains I figure it is a good time to get the info I will need when my time comes (at about 8000 miles now, so plenty of time). I was checking the above site to figure out if they would charge me tax and/or shipping and when I put this chain in the "cart" they added "Mini Chain Press Tool for 520 chain" for $19.99. This would seem to be a good price. Anybody know if this one works well enough or if I should get that ~$30 one from that other site recently mentioned? -- Doug Herr doug@...

need a chain

Posted: Wed May 19, 2004 9:41 am
by takes2serious
> I was checking the above site to figure out if they would charge > me tax and/or shipping and when I put this chain in the "cart" > they added "Mini Chain Press Tool for 520 chain" for $19.99. > This would seem to be a good price. Anybody know if this one > works well enough or if I should get that ~$30 one from that > other site recently mentioned? > > -- > Doug Herr > doug@w...
That tool worked fine for me on clip-type master links. Does anyone here use a non-O/X-ring chain on their KLR? I'm considering trying an RK heavy-duty non-O-ring chain.

need a chain

Posted: Thu May 20, 2004 12:05 am
by Mike Torst
Todd, are we going to ride soon, or ??? Also to all Las Vegas DS guys... Nice - now DID is being slammed. Fuc# my ankle, - I'll over-buckle up and we ride! Todd, are you doing the Harley ride, or do you want to find out if the pass is clear? I bet the pass is blocked, but why not check?? Last call fixer - Wheeler pass checkup, or a Harley ride to Mesquite. Your head cover is remounted, of course? Mike Torst Las Vegas
> -----Original Message----- > From: aboyandhisdawg [mailto:a_boy_and_his_dog@...] > Sent: Tuesday, May 18, 2004 11:44 PM > To: DSN_klr650@yahoogroups.com > Subject: [DSN_klr650] Re: need a chain > > which really suprises me... since DID bicycle chains are crap. i ran an RK > chain on my last bike after using up the factry chain... had good > performance > and life from that. > > i'm still dubious about the DID that the PO installed on my KLR. > > > fixer > KLR A1 > Lost Wages, NV > > > --- In DSN_klr650@yahoogroups.com, "Mike Torst" > wrote: > > DID X-ring chain is swell! > > > > Mike Torst > > Las Vegas > > > > > -----Original Message----- > > > From: russmoes [mailto:rmoes@m...] > > > Sent: Tuesday, May 18, 2004 9:21 AM > > > To: DSN_klr650@yahoogroups.com > > > Subject: [DSN_klr650] need a chain > > > > > > Just bought a used KLR. It needs a new chain. Could someone advise > > > on what to buy and where? A 520 106 links, right? > > > > > > Any other related advice is welcome. > > > Thanks > > >

brake performance

Posted: Thu May 20, 2004 3:06 am
by Eric L. Green
On Thu, 20 May 2004, Mike Torst wrote:
> The 320mm rotor upgrade works more than AOK, and is easier to modulate than > the stock disk.
One thing I'd suggest is upgrading to a progressive front spring first. With the stock spring, the KLR will dive for the ground with the stock brakes resulting in an awe-inspiring nose-down attitude guaranteed to make you an eunoch as your passenger slides forward and rams your family jewels into the gas tank (EEeeoow!). I'd hate to see what would happen with a 320mm rotor too. -E