Page 1 of 1
windshields (laminar lip?)
Posted: Wed Jul 02, 2003 11:33 am
by aregata4x4
I have a laminar lip on my Caponord and as Tom said it puts some
stress on the windshield.
I think that stock KLR would support the lip and there would be a way
of mounting one of the lips. But if you are talking about clearview
shield I bielieve that they are to week and would break. I have
clearview and on the highway speed you can see the shield going from
one side to the other sometimes. (no lip attached)
Also I never mounted one on KLR but on the Caponord it helps a bit,
not as much as they claim but better than stock.
Arek
--- In
DSN_klr650@yahoogroups.com, Thomas Currin
wrote:
> Emailed the manufacturer of the lip and he said they have no plans
to make
> one for the KLR. Says that the windshield would have to be braced
in order
> to support it.
>
> Tom
>
model year 16t sprockets
Posted: Wed Jul 02, 2003 1:30 pm
by xactoman2000
I am looking to put a 16T sprocket on my 93 klr650. Because of shipping and
close proximity, I want to get one from Dennis Kirk, but they only list 16T
sprockets available for 1987-89 klr650's. I thought that all parts from any year
would fit. Am I mistaken, or won't a sprocket from an 87 work on a 93?
thanks for your help,
alx
model year 16t sprockets
Posted: Wed Jul 02, 2003 1:56 pm
by Joe
Give Fred Hink (
http://www.happy-trail.com/) a call. He can have the
right one sent to you in usually 2/3 days!
--- In
DSN_klr650@yahoogroups.com, "xactoman2000" wrote:
> I am looking to put a 16T sprocket on my 93 klr650. Because of
shipping and
> close proximity, I want to get one from Dennis Kirk, but they only
list 16T
> sprockets available for 1987-89 klr650's. I thought that all parts
from any year
> would fit. Am I mistaken, or won't a sprocket from an 87 work on a
93?
>
> thanks for your help,
>
> alx
model year 16t sprockets
Posted: Wed Jul 02, 2003 1:58 pm
by Joe
Ooops! False advertising on my part...he's at:
http://www.angelfire.com/ut/moab/index.html My BAD!!! I'm confusing
him with the competition...sorry.
--- In
DSN_klr650@yahoogroups.com, "Joe" wrote:
> Give Fred Hink (
http://www.happy-trail.com/) a call. He can have
the
> right one sent to you in usually 2/3 days!
>
> --- In
DSN_klr650@yahoogroups.com, "xactoman2000" wrote:
> > I am looking to put a 16T sprocket on my 93 klr650. Because of
> shipping and
> > close proximity, I want to get one from Dennis Kirk, but they
only
> list 16T
> > sprockets available for 1987-89 klr650's. I thought that all
parts
> from any year
> > would fit. Am I mistaken, or won't a sprocket from an 87 work on
a
> 93?
> >
> > thanks for your help,
> >
> > alx
model year 16t sprockets
Posted: Wed Jul 02, 2003 2:02 pm
by Dave Morrow
> He can have the
> right one sent to you in usually 2/3 days!
Wow, that would be like, 16 hours. I knew Fred was good but...
--
Dave Morrow
Vermilion, Ohio
"it is better to go into a turn slow and come out fast,
than go into a turn fast and come out dead." - Stirling Moss