Page 1 of 1
front end alignment
Posted: Tue Jul 01, 2003 11:44 am
by comfortcm
So took my 2003 KLR650 out for my first dirt biking experience. Got
a little caught up trying to get the bike in a wheelie. Did too
good of a job and flipped the bike over. Fortunately I was able to
get out of the way, however the handlebars now are slightly off the
alignment with the tire. It appears I am turning left when I am
going straight. It does not appear that anything is bent.
Anyone had to realign the handlebars with the front wheel? If so
what is the best way to do it, any specific bolts/screws to loosen,
etc.
Thanks,
Chris
front end alignment
Posted: Tue Jul 01, 2003 1:09 pm
by Devon Jarvis
Search the archives on the Yahoogroups site, this was talked
about last week.
Devon
comfortcm wrote:
>
>
> Anyone had to realign the handlebars with the front wheel? If so
> what is the best way to do it, any specific bolts/screws to loosen,
> etc.
>
marine klr250
Posted: Tue Jul 01, 2003 11:07 pm
by Glenn
I KNOW that is the 650. The previous subject was a debate about the
marine KLR's so I
posted a link to a Marine trying to touch flat foot on the bigger 650
and being unable to do so.
The picture of the bike on the aircraft carrier sure looked like a
250 to me. The guy on the bike had his knees bent BIG TIME!!! If that
was indeed the 250 they MUST be outfitting it to look like the same
as the larger 650.
Can anyone here touch flat foot and bend their knees that much?
I'd imagine even someone over 6 feet would not have to bend their
knees that much.