new eldon carl site

DSN_KLR650
Post Reply
david
Posts: 8
Joined: Thu Oct 29, 2009 7:23 am

shock question

Post by david » Mon Apr 28, 2003 4:29 pm

Does anyone know if a klr650 shock will fit a 250, or does anyone know the dimensions of a klr 650 shock that way I can compare it to the shock on my 250(length eye to eye, width of ends, or any other measurements that might help). Thanks in advance for any help you can provide. David

Rick Kubik
Posts: 55
Joined: Fri Feb 21, 2003 12:58 pm

shock question

Post by Rick Kubik » Mon Apr 28, 2003 10:49 pm

well I just happen to have a KLR650 spare in the basement: center of eye (top) to center of clevis = 405 mm max diameter (i.e. of spring) = 78 mm clevis width = 30 mm (inside) from center of clevis, clearance to top = 40 mm clevis mounting bolt hole dia. = 15 mm eye end width = 20 mm eye end mounting hole dia. = 13 mm shock travel = 55-60 mm (depending how hard I compress the rubber bumper. Rick Kubik Calgary, Canada PS does that 250 shock have a flat bottom where the shaft emerges from the tube? ____________________________________________________________ Get advanced SPAM filtering on Webmail or POP Mail ... Get Lycos Mail! http://login.mail.lycos.com/r/referral?aid=27005

Tom Baumen
Posts: 68
Joined: Wed May 01, 2002 10:46 pm

shock question

Post by Tom Baumen » Mon May 05, 2003 11:44 pm

I was cleaning up my favorite KLR this evening and decided to spray the shock down with some WD-40 to loosen it up and keep it free. I noticed for the first time that there is an air valve at the top of it just under the airbox. Is this a factory shock and is this for refreshing the nitrogen in it? Tom Baumen

Devon Jarvis
Posts: 2322
Joined: Thu May 10, 2001 9:41 am

shock question

Post by Devon Jarvis » Tue May 06, 2003 9:15 am

If the air valve is recessed into the shock, that's stock but the valve cover has been pried off. If the stem and schraeder valve stick out about an inch or so then it's definitely not the stock shock. My Progressive 420 looks like this, but I don't know how many others do as well so who knows. Devon Tom Baumen wrote:
> > I was cleaning up my favorite KLR this evening and decided to spray > the shock down with some WD-40 to loosen it up and keep it free. > I noticed for the first time that there is an air valve at the top of > it just under the airbox. Is this a factory shock and is this for > refreshing the nitrogen in it? > Tom Baumen > > List sponsored by Dual Sport News at www.dualsportnews.com. List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html > Unsubscribe by sending a blank message to: > DSN_klr650-unsubscribe@yahoogroups.com . > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
-- "It's a troublesome world, all the people who are in it, are troubled with troubles almost every minute" Dr. Seuss

Rick Kubik
Posts: 55
Joined: Fri Feb 21, 2003 12:58 pm

shock question

Post by Rick Kubik » Tue May 06, 2003 11:09 am

Stocker will have a big square blue sticker on it with the name "Kawasaki" and a bunch of other wording. Yes the valve is there for recharge with nitrogen. If the shock is not obviously leaking oil, you can change the oil (I'll check the amount tonight) and recharge the gas to 150 lb. If it is leaking, you can rebuild it for about $30 in parts. Rick Kubik Calgary, Canada
>Tom Baumen wrote: >> >> I was cleaning up my favorite KLR this evening and decided to spray >> the shock down with some WD-40 to loosen it up and keep it free. >> I noticed for the first time that there is an air valve at the top of >> it just under the airbox. Is this a factory shock and is this for >> refreshing the nitrogen in it? >> Tom Baumen
____________________________________________________________ Get advanced SPAM filtering on Webmail or POP Mail ... Get Lycos Mail! http://login.mail.lycos.com/r/referral?aid=27005

mrmooseisloose
Posts: 53
Joined: Sun Apr 13, 2003 5:34 pm

shock question

Post by mrmooseisloose » Tue May 06, 2003 12:46 pm

> If it is leaking, you can rebuild it for about $30 in parts. > > Rick Kubik > Calgary, Canada
$30?! Really? Well I could afford to throw $30 at mine to make it hold oil till I scrape up the money for a rebuild. What do I need to order and from who? Do I have to get the spring removed? MrMoose A8 (Barbie and Ken special)

RM
Posts: 1977
Joined: Tue May 09, 2000 7:20 pm

new eldon carl site

Post by RM » Tue May 06, 2003 12:49 pm

On Tue, 6 May 2003, bkowalca wrote:
>I was a little suprised about his negative comments about fork braces.
I agree. I'm a fork-brace believer. Elden's comments do seem to have merit, and I'm sure he's right about their drawbacks. But I think Elden is focusing on a handful of rotten trees standing in a healthy forest. The overall effect of the fork-brace is positive. Elden and Stu are the only two people to express reservations about them, and Stu was probably sober and grouchy that day. RM

Post Reply

Who is online

Users browsing this forum: No registered users and 17 guests