Page 1 of 1
loobman mounting
Posted: Fri Oct 04, 2002 6:03 am
by Jeff & Bonnie
For those of you with the loobman system, where have you mounted the bottle and did you have much trouble getting the applicator lined up on the sprocket correctly?
Jeff
Jefferson City, MO
[Non-text portions of this message have been removed]
tire changing (massholes)
Posted: Fri Oct 04, 2002 6:47 am
by dooden
You folks must be using the metal milk crates ? (taller?)
I tried a plastic type in my stock KLR and the wheels where on the
ground still, admit not alot of weight on the wheels, but could not
spin a tire. Was being lazy my lift was in the back of the shed and
the milk crate was right there. Ended up getting lift out since I
needed to remove rear wheel to change sprocket.
Dooden
--- In DSN_klr650@y..., Tengai650 wrote:
> At 6:37 PM -0400 10/3/2002, Jim Priest wrote:
> >I had good luck with the milkcrate. I ended up popping the
> >KLR on the milk crate on our driveway which has just a slight
grade to it
> >- the nice part was it was enough of a grade to allow some
> >clearance under the front wheel.
>
> Yup, I've been using the same milkcrate for 5 years now.
> It's starting to get a little beat, so Jay "in PA" Hummer
graciously
> provided me with a new one.
> Mark
> B2
> A2
> A3