Page 1 of 1
lurching... any ideas why?
Posted: Mon Jun 24, 2002 9:19 pm
by johnglime
greetings...
the last few days i have noticed that my A15 is seemingly lurching
while i am driving. does anyone have any similar experience or know
the possible cause for this? lately i have been stuck mainly in the
city, so i have noticed it on the interstate while cruising and in
around town traffic...
any help or thoughts would be appreciated,
john
lurching... any ideas why?
Posted: Tue Jun 25, 2002 12:49 am
by kcuf_oohay_666
From your other post about how it resembles running out of gas. I
think Its something to do with fuel. My A15 is starting to do the
same. It's like a lean misfire. It might also need a valve
adjustment. I have noticed on my A15 that the valves don't make noise
anymore. I have not checked the filter yet. maybe my carb is dirty on
the inside
--- In DSN_klr650@y..., "johnglime" wrote:
> greetings...
>
> the last few days i have noticed that my A15 is seemingly lurching
> while i am driving. does anyone have any similar experience or
know
> the possible cause for this? lately i have been stuck mainly in
the
> city, so i have noticed it on the interstate while cruising and in
> around town traffic...
>
> any help or thoughts would be appreciated,
>
> john
nerf/hiway/engine guard color
Posted: Tue Jun 25, 2002 9:22 am
by jlyonamf
I am sure Tim will paint it yellow if that is what you want. It may
cost extra, check with him. I think his standard color on most items
is gray. I have seen a few KLR's with yellow highway pegs and side
racks.
John
--- In DSN_klr650@y..., "Brent B" wrote:
> >Does anyone have Tim's Nerf/Hiway/engine guard on their bike? I
think it looks >reat, especially the yellow! I want these and yellow
tail racks! I'm a bit concerned >however, looking at the picture it
appears that the Nerf bars might hit your knees at >the tank. I've
only seen one picture on his website and from the angle of the photo,
>it looks like it could be a problem if you are a little long in the
legs.
>
>
> I think the yellow is for display only...OR am I wrong?
> brent