Page 1 of 1
anti-theft, kickstand and clutch switch
Posted: Wed Mar 06, 2002 10:56 am
by jrs341
I had a lot of time at work tonight to sit and ponder. With all
the theiving going on I was thinking, everyone likes to disable the
sidestand and clutch switches. Well why not hook those circuits up to
a secret switch placed strategically on the bike somewhere that could
be easily turned on and off when the bike is parked.
My thinking is that if the theif was able to hot wire the bike he
wouldn't be able to go anywhere because as soon as he put it into
gear the sidestand and clutch switch would do thier job and kill the
engine.
Also what about those cool mercury switches I see on heating and
cooling systems. How about something like that under the seat so that
when the bike is leveled it will make the horn go off and not shut
off untill a switch is turned off?
My thinking is that something home made will be harder for a
theif to disable than a common alarm system.
Has anyone tried anything like this yet? Please all comments are
welcome.
Thanks
Jay
anti-theft, kickstand and clutch switch
Posted: Wed Mar 06, 2002 11:58 am
by PEDRO.VALDES@COULTER.COM
I like the ideas that you came up with. I specially like your active
approach at presenting the thief to multiple levels of disablement. I like
double and triple factors of redundancy ideally when the application is
your bike and how to keep it safe.
Good thinking
Peter
A-14 -> "Kryptonited" and chained to the floor, washing machine, and hot
water heater tank - (40 gal) in garage.
jrs341
DSN_klr650@yahoogroups.com
.com> cc:
Subject: [DSN_klr650] Anti-theft, kickstand and clutch switch
03/05/2002
11:56 PM
I had a lot of time at work tonight to sit and ponder. With all
the theiving going on I was thinking, everyone likes to disable the
sidestand and clutch switches. Well why not hook those circuits up to
a secret switch placed strategically on the bike somewhere that could
be easily turned on and off when the bike is parked.
My thinking is that if the theif was able to hot wire the bike he
wouldn't be able to go anywhere because as soon as he put it into
gear the sidestand and clutch switch would do thier job and kill the
engine.
Also what about those cool mercury switches I see on heating and
cooling systems. How about something like that under the seat so that
when the bike is leveled it will make the horn go off and not shut
off untill a switch is turned off?
My thinking is that something home made will be harder for a
theif to disable than a common alarm system.
Has anyone tried anything like this yet? Please all comments are
welcome.
Thanks
Jay
Checkout Dual Sport News at
http://www.dualsportnews.com
Be part of the Adventure!
Visit the KLR650 archives at
http://www.listquest.com/lq/search.html?ln=klr650
Post message:
DSN_klr650@yahoogroups.com
Subscribe:
DSN_klr650-subscribe@yahoogroups.com
Unsubscribe:
DSN_klr650-unsubscribe@yahoogroups.com
List owner:
DSN_klr650-owner@yahoogroups.com
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
anti-theft, kickstand and clutch switch
Posted: Wed Mar 06, 2002 12:12 pm
by Devon Jarvis
Professionals don't hotwire bikes. They use a few guys, pick up the bike
locks and all, and toss it in a van or pickup. Takes 30 seconds.
You have an interesting idea, but it would only deter a neighborhood
kid.
Ask Miata Mike.
Devon
A15
jrs341 wrote:
>
> I had a lot of time at work tonight to sit and ponder. With all
> the theiving going on I was thinking, everyone likes to disable the
> sidestand and clutch switches. Well why not hook those circuits up to
> a secret switch placed strategically on the bike somewhere that could
> be easily turned on and off when the bike is parked.
> My thinking is that if the theif was able to hot wire the bike
anti-theft, kickstand and clutch switch
Posted: Wed Mar 06, 2002 2:51 pm
by Miata Myk
> Professionals don't hotwire bikes. They use a few guys, pick up the bike
> locks and all, and toss it in a van or pickup. Takes 30 seconds.
> You have an interesting idea, but it would only deter a neighborhood
> kid.
On the other hand if there was a mercury switch that activated the horn
whenever the bike was uprighted (like when it's about to be picked up) that
would have been the alert my roomate needed and she would have seen who did
it and called it in immediately. That is an idea I really like and will look
into for the next bike (along with LoJack which is about $400 but worth it
if I get something like an R1 or a CBR-954). You would need to get two
switches, one for in case they lay it on the kickstand side, the other for
the upright. Probably around $5-7. A waterproof switch ($3-4) and some spare
wire you probably already have around the house. Very easy to wire up and a
cheap method of protection. It would have worked a lot better in my instance
than any number of chains/locks. Those don't help many people at all.
> Ask Miata Mike.
(sigh) Yeah..
anti-theft, kickstand and clutch switch
Posted: Wed Mar 06, 2002 3:07 pm
by s2mumford
--- In DSN_klr650@y..., "Miata Myk" wrote:
>
> > Professionals don't hotwire bikes. They use a few guys, pick up
the bike
> > locks and all, and toss it in a van or pickup. Takes 30 seconds.
> > You have an interesting idea, but it would only deter a
neighborhood
> > kid.
> On the other hand if there was a mercury switch that activated the
horn
> whenever the bike was uprighted (like when it's about to be picked
up) that
> would have been the alert my roomate needed and she would have seen
who did
> it and called it in immediately. That is an idea I really like and
will look
> into for the next bike (along with LoJack which is about $400 but
worth it
> if I get something like an R1 or a CBR-954). You would need to get
two
> switches, one for in case they lay it on the kickstand side, the
other for
> the upright. Probably around $5-7. A waterproof switch ($3-4) and
some spare
> wire you probably already have around the house. Very easy to wire
up and a
> cheap method of protection. It would have worked a lot better in my
instance
> than any number of chains/locks. Those don't help many people at
all.
>
Get a Doberman.
Stu
nklr: wd-40 debate
Posted: Wed Mar 06, 2002 9:04 pm
by David Kelly
TexasThumpin@... writes:
>
> No, it doesn't do any of those things claimed. But I'll tell you what it will
> do. It will keep your engine looking new, cut down on rust,
WD-40 is TERRIBLE at preventing rust. I can't think of much else which
is better for CAUSING rust. More than anything else WD-40 is a solvent.
A detergent. A cleaner. With a little bit of lubricant which evaporates
quickly.
Take a chunk of bare steel and clean it good with WD-40. And dip
another in motor oil. Let both set otherwise unprotected in the garage
for a week. The WD-40 steel will be covered with rust.
If you think WD-40 will protect against rust then use it on a gun
barrel. But not one you don't mind destroying.
--
David Kelly N4HHE, dkelly@...
=====================================================================
The human mind ordinarily operates at only ten percent of its
capacity -- the rest is overhead for the operating system.