Wilsons Sandbox

Correct me if I'm wrong, but if you want to use only one buzzer and the dash light, you will need 2 diode (like 1N4001) connected to the dash light signal (it will give you the positive signal you need) and then connect the negative wire to the ground of the bike. Stephane Fontaine A15 http://www.geocities.com/stfontaine_a15

--- In DSN_klr650@y..., "Jim Ousley" wrote: > > > As far as a beeper goes. I just bought two little 12v > > buzzers from radio shack, > > The KLR650 has a single dash light for the turn signals. > If you tap into the circuit for that light, you only need one > buzzer or light. > > Jim