Page 1 of 1
nklr clutch lock/ not disengaging
Posted: Sun Jan 13, 2002 12:54 am
by fxmyhed
RE: Clutch Not Disengaging
I am soliciting advice on possible cause of this problem.
Clutch release mechanism rotates in full range as if new with spring
pressure, and everything looks to be in order from the outside. But
when I turn the clutch release mechanism as far forward as possible,
bypassing any possible cable adjustment issue, the bike remains in
gear and does not roll freely in nuetral as if the clutch is somehow
stuck to the driveshaft. So of course when I put it in gear, the
motor stalls because it is as if I am not holding the lever in.
Am I destined to embark on a clutch side cover removal?
hid superwhite bulbs on ebay
Posted: Sun Jan 13, 2002 8:24 am
by Fred Hink
This ad says "This bulbs have a similar effect as HID systems that cost up
to US$1500!"
Does this mean it puts out light? (very misleading ad) :-/
Fred
http://www.arrowheadmotorsports.com ***NEW***
http://www.canyonlandsmotorclassic.com
----- Original Message -----
From: "Mark St.Hilaire, Sr"
To: "1 - KLR650 List" DSN_klr650@yahoogroups.com>; "ebaydeelez"
Sent: Sunday, January 13, 2002 7:19 AM
Subject: Re: [DSN_klr650] HID Superwhite Bulbs on eBay
> >
http://cgi.ebay.com/ebaymotors/aw-cgi/ebayISAPI.dll?
> > ViewItem&item=600368940
> > - can someone confirm that these fit the KLR?
>
> I don't come out of my cave too often, I guess, so I haven't heard of HID
> brand bulbs, but I DO know that if it's an H4 it will fit. I use
> CandlePower on this bike, and on my GoldWing before it...
>
>
> Wise men still seek Him...
>
> Mark St.Hilaire, Sr
> A15
> HomePage:
>
http://home.adelphia.net/~msaint/index.html
> KLR650 Pages:
>
http://klr6500.tripod.com/
> Valve Check & Adjustment Guide:
>
http://klr6500.tripod.com/valves.html
>
>