Wilsons Sandbox

Posted: **Mon Apr 16, 2001 8:03 pm**

Hello to all. The heat shield stuff under the right side panel fell off. Looks like it got wet and lost its stick. Whats the best way to restick it back on ? Goop, RTV High Temp silicone, or what ? Thanks Bob A-15 Louisiana

Posted: **Mon Apr 16, 2001 8:50 pm**

Mine fell off, never found it or needed it again! John Barry 01 KLR 650 81 R100S Dover NH

----- Original Message ----- From: "Nancy Davis" To: "KLR DIGEST" DSN_klr650@yahoogroups.com> Sent: Monday, April 16, 2001 8:59 PM Subject: [DSN_klr650] Heat shield stuff under side panel ? > Hello to all. The heat shield stuff under the right side panel fell off. > Looks like it got wet and lost its stick. > Whats the best way to restick it back on ? > Goop, RTV High Temp silicone, or what ? > > Thanks > Bob > A-15 > Louisiana > > > > > Visit the KLR650 archives at > http://www.listquest.com/lq/search.html?ln=klr650 > > Post message: DSN_klr650@yahoogroups.com > Subscribe: DSN_klr650-subscribe@yahoogroups.com > Unsubscribe: DSN_klr650-unsubscribe@yahoogroups.com > List owner: DSN_klr650-owner@yahoogroups.com > > Support Dual Sport News by subscribing at: > http://www.dualsportnews.com > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >

Posted: **Mon Apr 16, 2001 9:49 pm**

3M spray on upolstery adhesive worked (working) for me - only had to use it once. "Swede" SE CO

--- In DSN_klr650@y..., "Nancy Davis" wrote: > Hello to all. The heat shield stuff under the right side panel fell off. > Looks like it got wet and lost its stick. > Whats the best way to restick it back on ? > Goop, RTV High Temp silicone, or what ? > > Thanks > Bob > A-15 > Louisiana

Posted: **Tue Apr 17, 2001 1:58 am**

> --- In DSN_klr650@y..., "Nancy Davis" wrote: > > Hello to all. The heat shield stuff under the right side panel

fell off. Whats the best way to restick it back on ? I used some cheap ass Crazy Glue. Still stickin (through thick and thin...mud and water...). dat brooklyn bum

Posted: **Tue Apr 17, 2001 8:41 am**

Mine fell of too...was unable to stick it back...nothing seems to glue it there permanently

----- Original Message ----- From: "Nancy Davis" To: "KLR DIGEST" DSN_klr650@yahoogroups.com> Sent: Monday, April 16, 2001 8:59 PM Subject: [DSN_klr650] Heat shield stuff under side panel ? > Hello to all. The heat shield stuff under the right side panel fell off. > Looks like it got wet and lost its stick. > Whats the best way to restick it back on ? > Goop, RTV High Temp silicone, or what ? > > Thanks > Bob > A-15 > Louisiana > > > > > Visit the KLR650 archives at > http://www.listquest.com/lq/search.html?ln=klr650 > > Post message: DSN_klr650@yahoogroups.com > Subscribe: DSN_klr650-subscribe@yahoogroups.com > Unsubscribe: DSN_klr650-unsubscribe@yahoogroups.com > List owner: DSN_klr650-owner@yahoogroups.com > > Support Dual Sport News by subscribing at: > http://www.dualsportnews.com > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > >

Posted: **Tue Apr 17, 2001 9:46 am**

All your plastic side panel will melt, Summer is on its way, And with no heat shield your panel will melt, Don't ask me how i know this. Mike

Posted: **Tue Apr 17, 2001 9:59 am**

TLrydr@... wrote:

> All your plastic side panel will melt, Summer is on its way, And with no > heat shield your panel will melt, Don't ask me how i know this.

Lucky for me that KLR600s seem to be made of sterner stuff or at least better designed. Mister_T

Posted: **Tue Apr 17, 2001 10:41 am**

Yes the 650 is faster than the 600 and puts out more heat. Also the GI Joe green on the Y2K makes it able to go more places than the other colors, It has a anti radar green paint that can't be clocked by local cops, I will be the frist to admit it. Its so dam ugly, its pretty, Beauty is in the eye of the beholder. Its been said before. If you have an old KLR your brain needs a rest. We all know the Y2k is the best, you better bought good boots if you have a old bike. The BMW rider sits and blames his choke, We all no his rubber band broke. OK people get your finger off the triger, It was a jest, a joke. Fun , LOL. Mike In a message dated 4/17/01 10:01:55 AM EST, tedp@... writes: << Lucky for me that KLR600s seem to be made of sterner stuff or at least better designed. >>

Posted: **Tue Apr 17, 2001 11:44 am**

--- In DSN_klr650@y..., TLrydr@a... wrote:

> All your plastic side panel will melt, Summer is on its way, And

with no

> heat shield your panel will melt, Don't ask me how i know this. > > Mike

Indeed the right side plastic panel will melt without the heat shield. Don't ask me how I know either, please. -- Marc, KLR650 A12, Loveland, Colorado, USA

Posted: **Tue Apr 17, 2001 12:23 pm**

Hi

, I wanted to file off the casting ridge on the lever so I could have it a little higher, and one thing led to another. Think it was raining and I was bored that morning. Brian A14 TE 410E Honolulu, HI [Non-text portions of this message have been removed]

Wilsons Sandbox

rear master cylinder guard (holey lever)

heat shield stuff under side panel ?

heat shield stuff under side panel ?

heat shield stuff under side panel ?

heat shield stuff under side panel ?

heat shield stuff under side panel ?

heat shield stuff under side panel ?

heat shield stuff under side panel ?

heat shield stuff under side panel ?

heat shield stuff under side panel ?

rear master cylinder guard (holey lever)