Page 1 of 1
handguards wanted/ stator for sale
Posted: Thu Dec 07, 2000 12:15 am
by Falke Bruinsma
Hello
With the weather getting colder (20 F with flurries), I'm looking for
something to protect my hands from the wind.
Does anyone have a set of blue or white handguards laying around?
Perhaps you upgraded to better ones and you have your stock ones
laying in the garage?
Also, I purchased a new stator last summer on my trip back from
Alaska because I thought I needed one. I ended up not using it and it
has been sitting on my desk. If there is anyone who is looking for
one, let me know.
-Falke
'87 KLR650
'96 Vulcan 1500L
tank vent question - balancer etc
Posted: Thu Dec 07, 2000 8:28 am
by Steve Anderson
--- In
DSN_klr650@egroups.com, Ted Palmer wrote:
> Steve Anderson wrote:
> [...]
> > I have never really understood why people get all worked up about
> > this.
>
> And I wonder why some people get worked up about balancer tensioners...
I only got all worked up about the balancer system when I found a piece of
it stuck to my magnetic drain plug while changing the oil.
BTW, the magnetic drain plug is actually strong enough to hold onto pieces
of metal. I removed the plug, and found a bit of metal about 2 X 2 X 5mm
stuck to it. Another piece about 2 X 2 X 10mm was found in the oil I
drained out. Another piece about 2 X 2 X 30mm was found sitting next to the
adjuster. These three pieces ent up being the bottom of the slot of the
adjuster plate (this might only make sense to those who have actually seen
the part). The piece that was stuck to the plug didn't show much damge as
though it went into anything, but the somewhat larger piece that was in the
drained oil had some "chew" marks on it.
I hope you don't wonder why I got all worked up about it.
When the saga is complete (I still need to replace the chain), I will write
it up, and maybe include a photo of the broken part.
I know I'm getting repititious, but I will always pull the magneto cover off
when adjusting this thing.
Steve A.