Page 1 of 1
[dsn_klr650] idle mixture adj on a 85 klr600
Posted: Fri Apr 28, 2000 9:39 am
by beemerbigdawg@aol.com
In a message dated Fri, 28 Apr 2000 9:29:54 AM Eastern Daylight Time, Mike Cook writes:
http://click.egroups.com/1/3556/3/_/911801/_/956928329/
------------------------------------------------------------------------
Visit the KLR650 archives at
http://www.listquest.com/lq/search.html?ln=klr650
Support Dual Sport News... dsneditor@...
Let's keep this list SPAM free!
>>
If you had fuel injection, this would not be a problem. Additionally, fuel injection is more environmentally sensitive than normal carburetor fuel delivery.
BD
R1150GS
F650GS PD on order
[dsn_klr650] idle mixture adj on a 85 klr600
Posted: Fri Apr 28, 2000 2:44 pm
by Tobin Lampson
Mike,
Theres a guy named Jake Jakeman that works outa this little
shop called 'Sagebrush Machine Shop' in Milford, Utah. 411 or another
lister may have his number. He designed a special offset slotted
tool just for this purpose. Its about $20. G'luck
Slide
Mike Cook wrote:
>
> I have 1/4" between the bottom of the carb and the top of the starter motor.
> How in the world does a person adjust the idle mixture without
> a) Removing the carb?
> or
> b) Removing the starter motor an using a very special right angle screw
> driver?
> The 84 shop manual I have is for the non-electric starting engine, so
> adjustments are not too bad.
> Is there any tricks to this? It is impossible to start it using the kick
> start (stair master from hell!).
>
> ------------------------------------------------------------------------
> Get 3 months FREE and a chance to WIN a trip to London, England when
> you receive, manage and pay your bills online with Paytrust.com!
> Stamps, checks and bills in your mailbox are history. Enroll Today!
>
http://click.egroups.com/1/3556/3/_/911801/_/956928329/
> ------------------------------------------------------------------------
>
> Visit the KLR650 archives at
>
http://www.listquest.com/lq/search.html?ln=klr650
> Support Dual Sport News... dsneditor@...
> Let's keep this list SPAM free!
>
> Visit our site at
http://www.egroups.com/group/DSN_klr650
> To unsubscribe from this group, send an email to:
>
DSN_klr650-unsubscribe@egroups.com
[dsn_klr650] handlebars for bd
Posted: Fri Apr 28, 2000 5:32 pm
by Kurt Simpson
> Thanks. I didn't think I would meet anyone with as twisted a
> sense of humor as me, then I met Gino. He says he has played
> tricks on you guys before.
>
> Bob D.
It all happened after he pawned off the magazine he started...up to that
point he was just your average joe...than something snapped. Since than
we've seen it all including a stint as a prison bitch...oops..he might
not've wanted you to know that...
Kurt