[dsn_klr650] manuals-shock
Posted: Fri Apr 28, 2000 12:27 pm
Thanks Arne for first mentioning it and thanks Ron for sending me Elden's info. I was literally 4 hours away from leaving work and then taking half my bike apart to get at the shock as stated in the manual. This took half an hour; would have gone faster except for the difficulty of getting the bolts/nuts (screws? Dash?) loose. I hate those shallow bolt heads on the links. I shoved a cinder block under the rear wheel to lift the swingarm out of the way before the final step. Bogdan ________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com> KLR Shock Removal > > According to Ron Jensen, the rear shock on the KLR650 will come > off without removing the swing arm. I tried his procedure and he s > correct. The procedure goes this way: > > Jack the bike under the engine so the rear wheel > is barely touching the ground. > Loosen the upper shock bolt. > Loosen and remove the bottom shock bolt along > with the lower bolt holding the lever. Swing the > Uni-Trak link out of the way. > Remove the upper shock mount bolt and pull > the shock out the bottom.