Wilsons Sandbox

On Sat, 22 Apr 2000 22:30:50 -0400, jdweber@... wrote:

> > Hello,All > > Looking for advice on painting an aftermarket fender?Is there a web

site on this subject.

> > Thanks, > > Tom

Try http://www.anguish.org/~greyson/motorcycle/paint.shtml Someone had updated the procedure outlined (Arne, maybe) about a way to skip a step but I forget what that was. Still a lot of good info here though. dat brooklyn bum _______________________________________________________ Get 100% FREE Internet Access powered by Excite Visit http://freelane.excite.com/freeisp

I sand blasted every plastic part to be painted. Cleaned them all well with mineral spirits then sprayed on two thin coats of BULLDOG adhesion promoter. Then sprayed everything with a primer (non-sandable) and then the top coat. No clear coat as I am going after a matte finish. Everything came out great. I can flex every plastic part a great deal without cracking or peeling. LaterZ Dash

> > Hello,All > > > Looking for advice on painting an aftermarket fender?Is there a web >site on this subject. > > > Thanks, > > > Tom > >Try http://www.anguish.org/~greyson/motorcycle/paint.shtml > >Someone had updated the procedure outlined (Arne, maybe) about a way to skip >a step but I forget what that was. > >Still a lot of good info here though. > >dat brooklyn bum

Sorry Arne I just can't help myself. Way easy. So Arne are you the reason the dogs bark so much late at night? Our dogs bark at deer in the front yard eating off the fruit trees. I'm getting a new bow soon. MMMUAHHHAAHHHAA laterZ Dash

>Our neighbors have sheep, and their dogs are a cross between Great Pyranese >and Ackbash (sp?). Veeery large dogs. Easily 150 lbs. They also have a >donkey and a Llama. > >Cheers, > >Arne

A2 - Da' Bomb No Longer Crashing for Beer Will wheelie for Virgin Oil