Page 1 of 1
[dsn_klr650] chemically cleaned fuel tank?
Posted: Mon Apr 24, 2000 10:02 am
by Kurt Simpson
> I just picked up a bike that has some light rust in the fuel tank. I know
> there are products that will coat over severe rust problems, but can
anybody
> recommend something to clean out a lightly rusted tank?
Tom, you can go to your dedicated cycle shop and pick up the Kreem kit and
use everything but the liner treatment. Generally the drill goes something
like empty the tank of any gas...Fill it with a couple of quarts of solvent,
pour in a couple of handfuls of nuts and bolts. Swish like crazy for a long
while. Pour off and filter the fluids and nuts and bolts. Pour it back
in....keep doing that until no more rust is knocked off. I've spent a week
doing this stage (a couple of times after work). Now rinse the tank with
soap and water. Pull out the petcocks and any other aluminum parts and make
a temporary gasket to block them. The acid that is coming will devour the
petcocks and bolts. Add the acid according to the mixture recommended and
let it soak. I think they say for about 20 minutes but on badly rested tanks
I've sometimes soaked them for hours. The inside of the tank will turn to a
nice gray color. When she's done. Rinse, rinse, rinse. Now empty the tank of
all water and get it dry. They include an acetone product to get all the
water out. That's it...I've shied away from using the Latex liner.
From now on you need to keep the tank full with gas when it is in storage or
it will rust up real quick especially if you're in a humid climate.
Kurt
[dsn_klr650] chemically cleaned fuel tank?
Posted: Mon Apr 24, 2000 11:17 am
by Jose Luis Vázquez Gaytan
There is a product named Kreem is a three step complete system, to clean and
protect the inside of any steel tank.
I learn of this in the Tucker Rocky catalogue, and saw the job in a couple
of HD tanks, seems to work very well.
Hope this helps.
J Luis V zquez Gayt n
Puerto Vallarta, M xico
----- Original Message -----
From: tom stone
To: DSN_klr650@egroups.com>
Sent: Sunday, April 23, 2000 10:04 PM
Subject: [DSN_klr650] Chemically cleaned fuel tank?
>
> I just picked up a bike that has some light rust in the fuel tank. I know
> there are products that will coat over severe rust problems, but can
anybody
> recommend something to clean out a lightly rusted tank?
> ________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at
http://www.hotmail.com
>
>
> ------------------------------------------------------------------------
> Your high school sweetheart-where is he now? With 4.4 million alumni
> already registered at Classmates.com, there's a good chance you'll
> find her here. Visit your online high school class reunion at:
>
http://click.egroups.com/1/3139/3/_/911801/_/956545459/
> ------------------------------------------------------------------------
>
> Visit the KLR650 archives at
>
http://www.listquest.com/lq/search.html?ln=klr650
> Support Dual Sport News... dsneditor@...
> Let's keep this list SPAM free!
>
> Visit our site at
http://www.egroups.com/group/DSN_klr650
> To unsubscribe from this group, send an email to:
>
DSN_klr650-unsubscribe@egroups.com
>
>
[dsn_klr650] chemically cleaned fuel tank?
Posted: Mon Apr 24, 2000 11:27 pm
by Tom/Robin Ingram
----- Original Message -----
From: tom stone
To: DSN_klr650@egroups.com>
Sent: Sunday, April 23, 2000 9:04 PM
Subject: [DSN_klr650] Chemically cleaned fuel tank?
>
> I just picked up a bike that has some light rust in the fuel tank. I know
> there are products that will coat over severe rust problems, but can
anybody
> recommend something to clean out a lightly rusted tank?
>
Check out
www.rusteco.com
I have purchased some to use on a very neglected tank from a 1982 Honda 750,
but that project has not yet made it to the top of the list. You know how
lists seem to grow from the middle.
Tom Ingram
Montrose, CO
[dsn_klr650] carb update
Posted: Tue Apr 25, 2000 9:12 am
by Ted Palmer
Adam Stahnke wrote:
[...]
> I can get it to idle with the choke on and off, without black exhaust. Taking
> the choke off and applying 1/8 throttle brings back the black exhaust and
> rough running. I am suspecting the floats or the choke/enricher. Any other
> thoughts? I didn't remove the needle jet, pilot jet, or main jet when
> cleaning.
Maybe the CV piston rubber diaphragm isn't seated right.
BTW, if the bike is warmed up and you put the choke on then the bike
_should_ run rough and maybe a bit smokey.
Mister_T