[dsn_klr650] headlight adjustment
Posted: Sun Apr 23, 2000 12:49 pm
The up and down adjustment is controlled by a 10 mm bolt located under the
fairing, below the sealed beam unit. It allows the beam to pivot up and
down. You can reach it without taking anything apart. The side to side
adjustment is made from in front of the bike through the little recess in
the fairing on the right side of the lens, it is done with a screw driver.
Adjust, drive, repeat.
Morgan
----- Original Message ----- From: jim weber To: DSN_klr650@egroups.com> Sent: Saturday, April 22, 2000 7:54 PM Subject: [DSN_klr650] headlight adjustment > Hello All, > Looking for information on adjusting the front headlight properly on a KLR > 650? > > > ------------------------------------------------------------------------ > Good friends, school spirit, hair-dos you'd like to forget. > Classmates.com has them all. And with 4.4 million alumni already > registered, there's a good chance you'll find your friends here: > http://click.egroups.com/1/2885/3/_/911801/_/956458274/ > ------------------------------------------------------------------------ > > Visit the KLR650 archives at > http://www.listquest.com/lq/search.html?ln=klr650 > Support Dual Sport News... dsneditor@... > Let's keep this list SPAM free! > > Visit our site at http://www.egroups.com/group/DSN_klr650 > To unsubscribe from this group, send an email to: > DSN_klr650-unsubscribe@egroups.com > > >