h3 low draw and bright

DSN_KLR650
Post Reply
Jeff Saline
Posts: 2246
Joined: Fri Oct 10, 2003 6:02 pm

12 smd h3 car automotive light headlight fog led bulb w/ optroni

Post by Jeff Saline » Mon Sep 28, 2009 2:49 pm

On Mon, 28 Sep 2009 19:25:42 -0000 "Jeffrey" writes:
> Anyone tried this set up yet? > > I am going to rig these with those extra wires near the headlight. > > Jeffrey number 4
<><><><><><><><><><> <><><><><><><><><><> Jeffrey, Not sure about the set up on those but using the city lights wiring will probably not allow full output of the lights. The city lights wires are very small and I'm guessing won't carry the current needed to properly power auxiliary lights of any kind. Maybe consider using the city lights wires to control a relay that controls fused power straight from the battery. Along with this type of set up you'd also probably benefit from a good ground of sufficient size for the load. Best, Jeff Saline ABC # 4412 South Dakota Airmarshal Airheads Beemer Club www.airheads.org The Beautiful Black Hills of South Dakota 75 R90/6, 03 KLR650, 79 R100RT . ____________________________________________________________ Click here for great quotes from top international movers! http://thirdpartyoffers.juno.com/TGL2141/fc/BLSrjpTMAuQK1kzhM7gbfyO7lGXGLoGSLsgcllFlaDLcdCKTt8GPvKamNWI/

Jeff Khoury
Posts: 684
Joined: Tue Mar 31, 2009 11:08 am

12 smd h3 car automotive light headlight fog led bulb w/ optroni

Post by Jeff Khoury » Mon Sep 28, 2009 3:02 pm

I dunno... They each would draw only 65mA according to the specs, which -SHOULD- not be too much for those wires. Remember LEDs draw MUCH less current than a standard halogen bulb. Not saying that Jeff's proposal is wrong, in fact, it is a perfectly valid setup and probably the most prudent way to go. However, if it were me I think I'd try it without the relay first. (I'm an adventurous type though). -Jeff Khoury
----- Original Message ----- From: "Jeff Saline" To: nakedwaterskier@... Cc: "DSN KLR650" DSN_KLR650@yahoogroups.com> Sent: Monday, September 28, 2009 12:46:48 PM GMT -08:00 US/Canada Pacific Subject: Re: [DSN_KLR650] 12 SMD H3 Car Automotive Light Headlight Fog LED Bulb w/ Optronics Foglights; ? On Mon, 28 Sep 2009 19:25:42 -0000 "Jeffrey" < nakedwaterskier@... > writes: > Anyone tried this set up yet? > > I am going to rig these with those extra wires near the headlight. > > Jeffrey number 4 <><><><><><><><><><> <><><><><><><><><><> Jeffrey, Not sure about the set up on those but using the city lights wiring will probably not allow full output of the lights. The city lights wires are very small and I'm guessing won't carry the current needed to properly power auxiliary lights of any kind. Maybe consider using the city lights wires to control a relay that controls fused power straight from the battery. Along with this type of set up you'd also probably benefit from a good ground of sufficient size for the load. Best, Jeff Saline ABC # 4412 South Dakota Airmarshal Airheads Beemer Club www.airheads.org The Beautiful Black Hills of South Dakota 75 R90/6, 03 KLR650, 79 R100RT . __________________________________________________________ Click here for great quotes from top international movers! http://thirdpartyoffers.juno.com/TGL2141/fc/BLSrjpTMAuQK1kzhM7gbfyO7lGXGLoGSLsgcllFlaDLcdCKTt8GPvKamNWI/ [Non-text portions of this message have been removed]

Jeffrey
Posts: 367
Joined: Sat Oct 07, 2006 3:07 am

h3 low draw and bright

Post by Jeffrey » Mon Sep 28, 2009 5:37 pm

but steep price Replacement Lamps, Bulbs, Blinkers, Halogen replacements#70323 H3 Lamp, 35 watts, Halogen type. This is the 'Xtreme White' version. It produces 70 watts of light while consuming only 35 watts of energy. ... www.scootworks.com/shop.cgi/page.../SID=PUT_SID_HERE - Cached - Similar

Post Reply

Who is online

Users browsing this forum: No registered users and 22 guests