bike not shifting

[Chris Long]

I checked again, took out the oil screen and didn't see it. I even ran a magnet around inside the engine wherever I could get it and found nothing. I hope it is not in there to cause problems later. Chris

On Sun, Sep 13, 2009 at 7:13 PM, E Hines wrote: > I would look some more. You may want to check your oil screen. My > brother-inlaws was off and I found it in the oil screen. > > ------------------------------ > *From:* Chris Long > *To:* dsn klr650 dsn_klr650@yahoogroups.com> > *Sent:* Sunday, September 13, 2009 1:47:58 PM > *Subject:* [DSN_KLR650] Re: Bike not shifting > > > > So I just got around to working on this. Thanks for all the help with good > answers. I took off the right case and part number 92081 on the picture > below was missing. Of course it took me a while to figure that out since it > wasn't anywhere in the case or anywhere else that I could find. So now I > need to order a new one and put it in. If anyone in the Denver area has one > sitting around, I'd be happy to buy it from you. Otherwise, I'll just order > one tomorrow and wait. > > At least I have one motorcycle in service now. I just replaced a neutral > switch in my old Goldwing. That was quite involved. > > If the picture below doesn't work, here is the link: > http://www.bikebandit.com/houseofmotorcycles/showschematic/m17202sch549667 > > http://www.bikeband it.com/houseofmo torcycles/ showschematic/ > m17202sch549667http://www.bikebandit.com/houseofmotorcycles/showschematic/m17202sch549667> > >Thanks > again! > > Chris > 08 KLR > 78 GL1000 > > On Sat, Aug 15, 2009 at 7:26 PM, Chris Long > > wrote: > > > Hello everyone, > > I have been lurking here for awhile gleaning information from you all. > > > > I just did a big service on my 08 KLR. I replaced the valve shims, > checked > > the oil screen and added a thermobob among other things. I put it all > back > > together and it runs great! The thermobob seems to do its job, but the > bike > > is in first gear and won't shift. The shift lever moves up and down and > > returns to the center position, but it doesn't change the gears or click > or > > anything else. > > > > Any ideas on what I may have done? > > > > Thanks in advance for the help! > > > > Chris > > 08 KLR > > 78 GL1000 > > > > -- > Chris Long > Chris.M.Long@ gmail.com > > [Non-text portions of this message have been removed] > > > -- Chris Long Chris.M.Long@... [Non-text portions of this message have been removed]