already posted to the Graphic Conveter forum, just to get the ball
rolling:
At 2004-08-21 21:11 +0100 Rowland Carson wrote:
At 2004-08-21 21:16 +0100 Rowland Carson wrote:>At 2004-08-18 16:21 +0000 Thorsten Lemke wrote:
>
>>I released a new beta versions today
>
>>* help tags for icons added
>
>The help tag for the intersection selection mode box shows
>"end/middle mode" and that for the end/middle mode shows "section
>mode".
>
>By the way, I do like the automatic mode - this is very handy and saves time
At 2004-08-24 22:12 +0100 Rowland Carson wrote:>Thorsten - my first problem area:
>
>1 Create an elliptical arc. (As I have mentioned before, elliptical
>arcs still start and terminate in an unexpected place, and their ends
>still cannot be connected to other lines.)
>
>2 Export the file to DXF.
>
>3 Open the DXF file in CADintosh - the arc appears as a mirror-image
>(top to bottom) of the original. I can send a small sample file if
>you wish.
Apologies if everyone here has already seen these messages.>Thorsten - I don't seem to be able to figure out how to control which
>side of the reference line the new parallel line is drawn, if I just
>enter a distance. I thought it should respond to positive and
>negative values as (eg) above and below, or right and left, of the
>reference. It changes sometimes, but for no apparent reason. What am
>I missing, or is there a bug here? Obviously if I click, instead of
>entering a value, it goes on the desired side, but that does not give
>the precision of entering a distance.
regards
Rowland
--
| Wilma & Rowland Carson
| ... that's Rowland with a 'w' ...