Sent: Saturday, June 23, 2018 10:57 AM
To: B9Builders@yahoogroups.com
Subject: Re: [B9Builders] LASER CUT STEEL BRAINS - Who's Interested??? For all who asked to be on the list for B9 Laser cut Steel B9 Brains, soldered and primed with a mirrored Stainless Steel Top...
It won't be long now! The master assembler (Greg L.) is toiling away in his robot workshop, and the results are spectacular.
[img]cid:image001.jpg@01D40B89.74705150[/img]
Here is the latest and greatest list of builders who wanted in on this run. As the brains are finished (and the first ones should be as early as next week), they will be offered to the people at the top of the list and then I will work my way down as they are completed. If you changed your mind, np. we can take you off and move to the person.
Brain List:
Reed Franklin
KC
Gregorio Padin
Ron Murray
Herb Carpiniello
Daniel Deschambault
Shane Schaffner
Braun M.
Ken Parker
Daniel Angel
Robert Sheehan
Mike Hayes
Ray Wilson
Fred Barton
Tim Kusz
Roman Hoshowsky
Robert Rossi
Paul Johansson
Andy Brescia
Chip Hollon
Roger Galpin
Scott Atkins
Herb Clann
Ray Schwartz
Sandy Rivera
Gregg Vay
Tom Carey
Reserve list:
Mark Newlon
Mark Dziak
Cheers!
Craig
At 06:40 PM 3/12/2018, you wrote:
OK, I think we will have to consider this run closed, but if you still want in, let me know and I can put you an the reserve list.
Here are the folks on the list. Again those on top get the first ones completed and so on down the list.
Thanks again to everyone who responded!
Craig
At 10:12 PM 3/10/2018, you wrote:
Oops, just saw this. Yeah I ll epoxy, don t want to use a new board, I ve got b9creations circuit board with the incandescent lights and I really like the look best. I have a tom w. Led board and even went so far as to swap,out the leds for warmer ones, but it just doesn t look the same as incandescent
Sent from my iPad
On Mar 10, 2018, at 11:17 AM, Craig Reinbrecht craig@bex.net [B9Builders] wrote:
Yes, the top is stainless steal. There are probably a few ways to accomplish this...
When designing your interior brain lights, have the 3 sockets protrude up through the holes. Or, like what I did is epoxy the sockets to the underside of the brain top. A third possibility if it comes to pass... Greg is working on offering completed fully populated "Brain Boards" that will include the 3 top sockets (and all the rest of the interior sockets) for this brain. This is still in development, so we will just have to see...
Craig
At 10:13 AM 3/10/2018, you wrote:
Craig,
How do you suggest the round column posts for the 3 top lights be attached to your polished brain top? Is is stainless steel?
Herb
Sent from my iPad
On Mar 10, 2018, at 9:45 AM, Craig Reinbrecht craig@bex.net [B9Builders] wrote:
Hi All,
OK, BRAIN parts have been ordered and this project is a go! A big thanks to all who responded and helped make this run possible. Below is a list of everyone who responded. If you still want in on this run and you do not see your name below, please send me a private email to craig@bex.net.
A couple things to note... First, I will not be able to offer the polished mirrored tops separately for a variety of reasons. Most importantly is that it is doubtful it will fit any other B9 brain and these are extremely difficult to trim with destroying. How do I know that... guess
Next, I want you all to know that the brains will be EXPERTLY assembled by none other than former B9Creations employee, Greg Logue! Yes, Greg assembled over 60 of these brains during his professional Robot building career! Has anyone else on the planet assembled that many B9 Brains?? So when I say expertly assembled... I am not kidding!
Here are the folks who responded in the order I received the request. So, as the brains are built they will be offered to the people on the top then I will go down the list as they are completed. This will most likely be in the May time frame.
Reed Franklin
KC
Gregorio Padin
Ron Murray
Herb Carpiniello
Shane Schaffner
Braun (BJ) M (AU)
Ken Parker
Daniel Angel
Robert Sheehan
Mike Hayes
Ray Wilson
Fred
Tim Kusz
Roman Hoshowsky
Robert Rossi
Paul Johansson
Andy Brescia
Chip Hollon
Thanks again,
Craig
At 10:44 AM 3/9/2018, you wrote:
Craig,
I didn t see if you ou confirfirmed, will you be able to supply the mirrored finish brain top by itself, and if so, does it need any kind of coating like a clear coat to maintain the finish?
Sent from my iPad
On Mar 4, 2018, at 10:15 AM, Craig Reinbrecht craig@bex.net [B9Builders] wrote:
No.
At 11:07 PM 3/3/2018, you wrote:
Any chance on getting those made for a Trendmasters 2ft Tall R/C B9?
On Saturday, March 3, 2018, 7:38:00 PM EST, Craig Reinbrecht craig@bex.net [B9Builders] wrote:
Hi Ray,
What is your last name so I can get you recorded completely?
Thanks,
Craig
At 01:54 PM 2/27/2018, you wrote:
Hi Craig, I would be interested in a Brain, Thanks, Ray
On Monday, February 26, 2018, 8:42:59 PM EST, Craig Reinbrecht craig@bex.net [B9Builders] wrote:
Bob,
It should! ... but let me know.
Craig
At 08:16 PM 2/26/2018, you wrote:
Hi Craig,
I may be interested in just the highly polished stainless steel top as I don't know if the brain I got from you has one.
I will have to dig and check it.
Bob Jaconetti
B9-0663
On Feb 26, 2018 8:04 PM, "Craig Reinbrecht craig@bex.net [B9Builders]" wrote: > Contdd>Continuing the wave of excciting parts announcements... .....I would like to find out how many builders would be interested in a high quality laser cut steel BRAIN, which would come expertly assembled and primed and ready to paint. It does get much better than that! It would also include a polished, mirrored stainless steel top (very hard to photograph, by the way, lol) The price would be https://ipmcdn.avast.com/images/icons/i ... g-v1.png35 plus shipping. They would be ready in the May - June time frame. (time to recover from your recent claw purchase) If interested... Please reply and let me know. I am not looking for an iron clad commitment or any money down right now, but I do want to know if you want in on this run, and likely to buy. I plan to pull the trigger on this tomorrow if there is enough interest Thanks, Craig
[url=http://www.avg...com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient][/url][url=http://www.avg...com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient] [/url] Virus-free. [url=http://www.avg...com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient]www.avg.com[/url]
Content-Type: image/jpeg; name="3ecbd94c.jpg"; x-mac-type=4A504547; x-mac-creator=4A565752
Content-Disposition: inline; filename="3ecbd94c.jpg"
Content-ID:
X-Attachment-Id: 6fb937b5d3d1dcac_0.1
Content-Type: image/jpeg; name="3ecbd95b.jpg"; x-mac-type=4A504547; x-mac-creator=4A565752
Content-Disposition: inline; filename="3ecbd95b.jpg"
Content-ID:
X-Attachment-Id: 6fb937b5d3d1dcac_0.2
Content-Type: image/jpeg; name="3ecbd97b.jpg"; x-mac-type=4A504547; x-mac-creator=4A565752
Content-Disposition: inline; filename="3ecbd97b.jpg"
Content-ID:
X-Attachment-Id: 6fb937b5d3d1dcac_0.4
Content-Type: image/jpeg; name="3ecbd96b.jpg"; x-mac-type=4A504547; x-mac-creator=4A565752
Content-Disposition: inline; filename="3ecbd96b.jpg"
Content-ID:
X-Attachment-Id: 6fb937b5d3d1dcac_0.3